Gerri,
Thanks for the kind words. Don't know if you saw the Carnage Hopper SBS http://www.flyanglersonline.com/bb/s...variation)-SBS but I coat the needle with Mucilin before I brush on the Super Glue and start wrapping the foam; seems to do a decent job letting the foam release from the needle, although it's not foolproof. I do use different size needles, depending on the fly size; thicker ones for 2mm foam bodies and fairly thin needles for ones used for 1mm foam. Keep at it; when I first started I was lucky to get 1 out of 5 to turn out okay. I've been tying up a fair number of the bodies recently and am hitting about a 60% success rate.
Regards,
Scott
ps - been a few years but always loved going to Damascus to get a Jimmie Cone