# How To Make a Wing Burner
 - Volume 6, Week 16 Fly Angler's OnLine

**URL:** <https://www.flyanglersonline.com/t/how-to-make-a-wing-burner-volume-6-week-16-fly-anglers-online/4681>\
**Category:** Fly Patterns\
**Tags:** fly-tying, feather\
**Created:** [January 18, 1998, 12:00pm UTC](https://www.flyanglersonline.com/t/how-to-make-a-wing-burner-volume-6-week-16-fly-anglers-online/4681 "1998-01-18T12:00:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dave](https://www.flyanglersonline.com/letter_avatar_proxy/v4/letter/d/ee7513/32.png) [@dave](https://www.flyanglersonline.com/u/dave)\
**Post date:** [January 18, 1998, 12:00pm UTC](https://www.flyanglersonline.com/t/how-to-make-a-wing-burner-volume-6-week-16-fly-anglers-online/4681/1 "1998-01-18T12:00:00Z")

</div>

* * *

Wing burners are available commercially through local  
fly shops or catalogues, but sometimes a size or  
particular shape you have in mind are not found. Or you  
don’t want to wait to get one. Here is how to make your  
own. The photos shown are for a tent caddis, with the  
burner for a dragon fly wing shown at the end of the  
article.

Start with a strip of brass, (available at hobby shops, or  
hardware stores as shim stock.) — inch wide, .025 to .032  
inch thick and about 8 and 1/4 inches long.

1. Bend the strip in half and clamp it tightly with vise  
grips so the ends are even.

2. With a hammer flatten the strip at the bend.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/9/90f3a593111f0245e653c4a80c51005f090ef8be.jpeg)

1. Draw the shape you want on the open ends.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/7/7af6fef6c41b1ff1b7a72408c82ac924beb83389.jpeg)

1. Clamp the brass with the vise grips as shown below.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/d/dbee02b79251970eb90d8ca78c436b5a24efe7c0.jpeg)

1. With a saw and a file cut the brass to the desired  
shape while it is clamped in the vise grips. Smooth off  
the sharp edges with a file.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/e/e32bb1690028e7cfd2cc9046833224c04696a894.jpeg)

1. The photo below shows a feather held in the burner.  
Use a lighter to burn the feather that is sticking out  
around the metal burner, but do NOT burn off the quill stem.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/1/1c2f2ddf9a1ef807b7b624fb73803cb12b4b322f.jpeg)

1. This is the finished fly. The wing is about 1 1/4  
inches long.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/e/e1e8a40d69399a6fb1cc80b5a37dec15173f933c.jpeg)

1. Caddis and the wing burner.

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/c/cd4622b5d5a4814ec62f15784536560e6d5baf67.jpeg)

Here is a wing burner made by the same method for a Dragonfly:

 ![](https://www.flyanglersonline.com/uploads/default/original/2X/8/8e4c30b3464b060325daad9f1eb653f00fa04b6a.jpeg) ![](https://www.flyanglersonline.com/uploads/default/original/2X/9/98e08ab3c516095ddf62ab05946accd3c7c8984e.jpeg)

Give it a try. _ **~ Dave** _

* * *

Please check out the Fly Tying Section, on the Bulletin Board, here at FAOL too.

If you have any questions, tips, or techniques; send them to  
[[FAOL]](mailto:FAOL)

* * *

Originally published January 18, 1998 on Fly Anglers Online by Dave.

---

<div class="post-metadata">

**Author:** ![system](https://www.flyanglersonline.com/uploads/default/original/1X/4d5bd5db42e892e6db10c036dcf930e03d6646bc.png) [@system](https://www.flyanglersonline.com/u/system)\
**Post date:** [March 27, 2026, 8:02pm UTC](https://www.flyanglersonline.com/t/how-to-make-a-wing-burner-volume-6-week-16-fly-anglers-online/4681/2 "2026-03-27T20:02:40Z")

</div>

Closed on March 27, 2026, 8:02pm UTC


