The hardware on my handle just fell into the water, any ideas on what adhesive i should use to glue it back on. The rod is a bllt boron/graphite. Is there anything i definitely shouldn?t use? I have never built a rod and believe in asking people that know before i do something stupid. Thanks for your help.
Any two part epoxy will work just fine. Hardware store 5min, 10min, 30min…whatever you find locally that is two part is okay to use.
Steve
I was recently in the market for epoxy shopped Walmart and Home Depot, neither had anything with over a 5 minute setting time. Who sell 30 min. these days beside online?
Jesse my local Hardware stores such as Ace and Aco both have 30min. If you have one of those nearby check them out.
Steve
UJ…was in Ace yesterday…not sure I saw 30 min…but I definitely saw it at True Value Hardware…and might mention that 5min 25 ml Devcon was $2 less than ACE
That Devcon will work just fine. I’ve used a lot of that on grips. Just don’t waste any time putting things together.
I checked the nearest True Value is over 20 miles. I will just work faster with the stuff I bought at Wallyworld. Being the home of Home Depot made it hard on a lot of independent hardware stores, however there is an Ace that does great but they also repair mowers, weed whackers, etc.
JB Weld would work, too.