I had to try a couple of things and this rod is where I tried them. It’s a 2pc, 7’ 6", 3/4w, Tiger Eye blank as near as I can tell. It’s one of those I got from the local outfit dirt cheap.
It has a slide band reel seat with black hardware and black single foot guides. Wraps are dark brown with tan trim.
The grip is a cigar grip with a “Fly” Fisherman burned into it and the ends are dyed with cordovan leather dye. The grip is sealed with 2 coats of wipe on poly.
I also did a snakeskin inlay for a butt wrap and under the stripper. I need to find thinner snakeskin before I do this again.
If you use 3 to 5 “safety wraps” on the upside of the rod…you can use the same method you use on the other end.
Ive been told that safety wraps arent needed…but I can tell you this…without them a single footed guide CAN DEFINATELY be pulled lose. A steady pull doesnt normally do it…its a RAP…a short SMACK that makes them come out.
And never forget the “over the blank - under the finger” method for installing trim bands AFTER the guide has been wrapped.
kbproctor I like it. The snakeskin looks good and highlights the color of the wraps. My thoughts on trim wraps or for that matter any kind of wraps or just building a rod are this. The rod built is a extension of the personality and imagination of the rod builder. One of the nicest rods I have seen built was very basic, no trim wraps, no butt wraps, just a rod. The craftmanship was unquestionable. This rod falls in that catagory. I am not saying it is plain at all. The craftmanship is excellent. the staining of the cork with the color of the wraps and the snakeskin and the color of the reelseat are all brought together in one neat awesome package. For what it is worth I wouldn’t mind owning that rod at all and I as a rule would only take one of my own or steve’s. Please take this as a very high compliment. Again one awesome rod keep up the good work.
I used Cordovan Tandy Pro Dye. It is a spirit dye used for leather. To be quite honest, I don’t know if they still make it due to environmental and safety issues as it has a ton of nasty stuff in it. BUT, it works! Feibing’s leather dyes work well, too.
Thank you. My goal is to be able to sell the rods I make. I darn sure don’t need all the rods I have built. :lol: Right now, I need to prefect technique. Sully might not have liked the rod, but he has valid points on the lock wraps. It would, at the very least, look more professional. I value Sully’s opinion. He is all about quality. He will probably hate the next rod because it is nowhere near traditional, but I am pretty sure there are several guys on the board that will love it.
That’s a nice looking rod. Tiger Eye blanks make nice rods and really show their colors in bright sunlight. The reel seat color goes well with the blank color and wrap colors.
I wouldn’t get too overly concerned about the lack of locking wraps. I’ve made several over the years without the locking wraps and have never had any come out.
My opinion doesnt amount to jack squat $$$-wise…but remember 2 things…
You cant make a living selling low dollar rods
You’ll never sell a HIGH $$$.oo rod with a fancy butt wrap on it.
Not only does it ( and the finish) add weight…but what looks great to you might look like doggie do-do to the next guy. Dont matter if its a $400 blank or a $15 dollar blank. It takes HOURS to do a extra fancy butt wrap ( and I dont mean that kind of garbage that looks like the old Chinese finger puzzles…that you can slide on a blank and then stretch out and it looks like its all woven) and those hours are costing YOU …$$
to add to what sully said…take a look at how high end rod models or bamboo rods are wrapped. for the most part they are subtle. no bells and whistles stickers or flash. that kind of thing is for nascar and bass fishing tour. not looking to step on anyone’s toes, just adding my voice (read opinion) to the mix.
Exactly! Doesnt matter if its a hand made SUPER HIGH $$$ elephant gun…or an equally ( well almost) $$$ fly rod. There is a “classic” design in either / both thats sort of “semi vague” as to what constitutes that line…but you know it when you see it!
I agree that a flyrod is a different beast than other types of fishing rods (especially saltwater rods). Generally, like Sully said, most people like the more subtle look in their custom flyrod. Things like single trim wraps, embedded wraps, and spiral wraps, accent a fly rod nicely without being gawdy. You will get the customer who wants to bling it up or the unusual on occasion, so you need to be ready for that also. I also do not like the big butt weave on a fly rod(freshwater up to a 7 wt.), but think they look awesome on the bigger wts.,spey rods and saltwater where you have larger butt diameters.
As far as costing you money to do them, not quite true. If it takes me 5hrs to do a nice chevron weave say, the rod costs an extra $100. I do not do them just to do them, they have to be requested by the customer and therefore they pay for it.
I do not lock in my single foots until they get up to 7 wts. I have not had any yet sent back because a guide came loose or fell off. Generally when it gets up to the larger wts, I recommend snakes and then the issue is moot.
No you can not make a living from just making the $200 rod, but you CAN make a nice second income. I build 4-6 rods a month, mostly flyrods in the $200-$300 range. My "real" job is a Industrial Arts teacher with 5 years to go to retire. Most of my business is word of mouth and repeat. I have my business license and pay ALL my taxes and plan to expand a little when I retire. That doesn't mean I do not build the high dollar rod, I just do what the customer wants and can afford. It is their rod not mine. Hell, I do not even put trim wraps on my own rod, in fact my personal rods are about the plainest things out there, except for my handles and reel seats that I make myself.
Im with ya…99% of the way. SECOND income…what I typically call “beer money”…then $200 rods can line your pockets quite well. But using your numbers…“5 hrs and $100”…thats $20 an hour…and if your in BUSINESS of doing these critters…you aint going to make it at $20 an hour.
Taxes and license…geeze. Sure takes a hunk out of the profit.
Keep up the good work and I hope you get to where ya want to be in the rod building business!
Typically, I like a more subtle look in my fly rods, too. As I mentioned in the original post, there were some things I simply had to try and this rod is the one they got tried on. The only thing I am hearing any real objections to is the snakeskin.
I have tried several different things on my rods. I have found that the ones folks have the best reactions too are the feather inlays. I am probably going to focus in that direction. Folks seem to like the rattan grips, too. Those are inexpensive and quick to do. Those will be incorporated in what I do, as well. I have lusted after a lathe, but for what a top grade cork grip and Struble seat would cost, I can get a matched wood grip and seat turned by someone else. Since time is my most expensive material, I would not save enough by turning the grip myself to justify the time spent doing it.
Taxes and licenses are a part of the cost of doing business. To be honest, they are not all that much. You build the $10 excise tax into the cost of the rod and charge the customer the sales tax. They know they have to pay it so it isn’t a big deal. The cost of the license is more than outweighed by the ability to buy at wholesale over retail.
I understand the “Time” thing much better than you might imagine. This took me all of an afternoon, but I would never get paid what the 4-5 hours involved was worth. This was done 20 years ago. I wish I could find the saddle pictures.
I think you can add decorative butt wraps and mutliple color guide wraps while still keeping a classy look. If I wanted to buy a basic looking rod, I would just go grab one off the shelf. To each their own I suppose, but I always use at least three colors in my guide wraps and add a decorative wrap or weave to my rods. I think it adds an extra custom touch.
kbproctor - Very nice looking rod. I really like the snake skin under the stripping guide. Is that a hard material to work with?
BUT…a rod off the shelf wont have the “custom” work done to it that a good “non-factory” will have. Typically the grip will be a tad large for me. Someone else posted they were too small for them.
And it goes on and on. Guides; reelseat…etc. Many low cost rods use a Fuji graphite reelseat…which in my opinion look like **** but work perfectly.
Not to say every rod built should be using Bellinger seat and such but they sure are classy looking.
You may USE 3 colors of thread on your wraps…but how many of those rods are you SELLING for high dollar…?? Thats where the “rubber meets the road” as they say.
Basic LOOKING and basic PERFORMANCE are two seperate things