I was unable to find where to buy 1mm and 1.5mm tippet rings in the US. All I could find was either out of the UK…or in the US only 2mm. I do not want to purchase from the UK. I did once and my e-mail ID was spread to every spammer on the planet.
Jim,
I think the ones I use are 2mm, and I got them from Feather Craft. Somewhere back in one of the thread about rings, Jack posted somewhere to get them for less than what the are at FC, but I haven’t been able to locate it … yet.
Betty
Here is another source for the rings, but, none in the sizes you are looking for:
Warren,
That’s where I purchased my 2mm rings. And I like them. Not necessarily cheap…but for some reason it said I got a $5 discount off! Happy with that. But he does not have anything smaller. Are the nickle plated ones better than the jewelry silver ones?
BTW…haven’t had time to try suggested methods to dull tippet ring’s brigtness. But…soaked one in lemon juice for three days. Absolutely no affect on the shiny ring. I’m in a small town not near a big city. Won’t be able to get selenium to try for awhile…unless I find it on a website. I might try the pharmacy or photo section of Walgreens.
Jim
Ya gotta think “carp”!
Wacker Baits carries several sizes, including 1.5mm. I can’t post the direct link, but go to www.wackerbaits.com and click on WackerBaits.com at the top.
Then, click on “Tackle” at the left of the screen. Then, click on “Rigs and accessories - swivels, rings & clips”.
Scroll down the page until you see the rings, item # RB359010-s.
If you ever want to try an English shop, check out www.tackleshop.co.uk
I know the owner (Mike Stone) and have ordered from him before. He’s a good guy.
Wow 1 mm and 1.5 are tiny, I ordered some 1.5 mm ones back when that uber long Furling thread was started. They were too small for even a 6/0 thread furled leader. I couldn’t use them because I couldn’t thread them onto my 6/0 uni thread leaders. I cannot remember where I ordered them from. The brand is Roman Moser , I just checked Google and they are German made. I did order them from somewhere in the states. The info is on that long long furling thread but I cannot locate it on faol. I thought it was JS Stockard but I checked and they only have the 2mm and up.
These guys have the 2mm rings (smallest they carry). They are made by Roman Moser.
http://www.anglersupplyhouse.com/shop/item.asp?itemid=84
FWIW, Nighthawk lives really close to this place. Maybe he’ll know if they have the smaller ones in stock at the shop…
DB4
Thanks for info. Well done. I was able to go straight to the 1.5mm rings Teflon coated. That eliminates the glare which I would prefer. However $6.99 for ONE not counting shipping is a bit too spendy for me. Wow.
As far as the UK goes…I have been there. Toured London, London Dungeon, Trafalgar Square, Tower Of London…rode the busses and the tubes…unfortunately the busses have been eliminated.
So I don’t have anything against the UK or the Brits. When I purchased a reel from Yorkshire Anglers…I started getting solicitations from about 6 different fishing business’s from the UK. It may not have been Yorkshire that exposed me to the world…but it HAD to be them that shared my information with other UK companies. So either Yorkshire…or one of the other companies they shared my info with … somehow I was then exposed to the world. The spam started from all over the world. Once I was exposed to the world…the spammers in the US got ahold of me. It was pretty bad. I myself will just fill my needs from US suppliers. I should be able to fill my needs here. I actually changed ISP’s to get away from it all. Course I had NO spam before…so when it did come the contrast was huge.
Thank you for the advice though. I am sure Mr. Stone is a fine guy. I really hate to taint the idea of ordering from the UK…but on the other hand I owe it to FAOL to share my bad experience. Maybe help others. If there was a statement stating “we protect and do not share you’re info”…I would still order from the UK.
Jim
Thanks again for your help.
Why 1 or 1.5? Dang the 2mm are plenty small to me.
My source is J. Stockard.
Gem:
Unless I’m seeing things; when I looked at the site DB4D supplied I thought that price was for 25 rings. If so that’s the best price I’ve seen anywhere. You might want to call to confirm.
BTW - I too prefer the 1.5 mm rings.
Wow! Shazaaaam! Thank you Bam! You are correct. I called and talked to Paul. Shipping and handling doesn’t make them any more economical…$4.50. But I consider that a REAL good price. I ordered a pak of 25 (1.5mm) and a 25 pak of (2mm) teflon coated rings and my total is $18 and change.
I informed them of FAOL so they can see what/where we are talking about it.
Thanks Mr. Bamboozle.
YOU ALL TAKE NOTICE…that’s 25 teflon coated rings for…uh…think $6.99 plus shipping and handling. Think it’s $18.50. Ordering one pak would be .58 each…not bad considering teflon coated…but getting two paks under the same shipping made them .37 apiece. I’ll take that.
You da man BAM. period.
Thank you
Jim
Paul is a good guy. I’ve ordered from Wacker several times and have always been very satisfied.
DB4 Thank you as well. Your instructions were so good I went straight to them. Somehow I missed the quantity and Bam straightened me out on that. I thank you both. I will still try to dye the shiny ones I have, but anxious to get some 1.5’s and to see the teflon effect.
Thanks to you DB4 and Bam. This website is a place to find answers that’s for sure.
Jim
Gem:
Glad to help!
I gotta thank DB4D too because that is a cool site with some cool rigs!
I have always wanted to do the match rod thing for “coarse” fish and now I have a source if I ever decide to take the plunge!
Has anyone ever tried to make rings from metal tubing? Are copper or aluminum too soft? Taking the hard edges off would also be a pain, but I’m curious.
In the sizes their talking about, either side of 1/16", it would be hard to just see them, much less cut them. It’s difficult getting a smooth edge on something 1/4" in diam.
Just out of curiosity, has anyone miked the thickness of the rings? Just wondering?
Kirk