![]()
|
Nearsighted Angler, Part 2
Beetle Recipe![]()
Method:![]() 1.Tie in at the eye of the hook with fine thread, laying a thread base all the way to just down the bend, of the hook.
![]() 2. Then tie-in a proportionately shaped strip of black closed-cell foam at that at the bend.
![]() 3. Build up a few wraps of thread ahead of the foam, on the shaft of the hook, almost to the eye of the hook.
![]() 4. Thread a common sewing needle with an appropriately sized strip of Gold Antron, and tie it in at the center of the hook shaft, then pulling the foam body forward to the eye, stick the needle thru the foam, from the bottom, at the point which will be the center of the of the body, and directly above the tie-in point.
![]() 5. Now, attach the Black Antron just ahead of the tie-in point of the Gold Antron, in the spent wing step from the Ant Pattern.
![]() 6. Wrap the thread forward to the eye, and pulling the foam forward to form the body, secure at the eye of the hook. Tie off, and whip-finish.
![]() 7. Clip the Antron Brush Flag (being sure to remove any slack from under the foam), trim the legs to proper length, and you are finished.
![]() 8. You now have a very small beetle, with a flag that along with the ant pattern, has been responsible for the furthering education of over two dozen 14 inch Brown Trout, a few Rainbow Trout, and one very wild and feisty 5 inch Brook Trout, that snatched a #18 Ant Fly, literally off the nose of a hefty Brown.
![]()
|