+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Your Saltwater Rods? Why?

  1. #1
    Join Date
    Apr 2001
    Location
    Palm Bay, Florida/Rock River Wyoming, USA
    Posts
    284

    Cool Your Saltwater Rods? Why?

    I settled on a 7, 9 and 12 wt rod some time back but of late have added a 10/11 wt also.
    I prefer the BL5 Winstons for the heavier wt rods, a 7 wt Dorber E3, a 9 wt Cortland and not sure what I'm getting for the heavy 10 or light eleven. The 7 and 9 are my two go to rods for Reds, Bonefish and most inshore fishing. The 10/11 will be for Med Tarpon and Permit while the 12 wt will be for Tarpon and other big guys.
    Good Fishing,

    Chuck S (der Aulte Jaeger)

    "I've traveled a long way and some of the roads weren't paved"

    http://fishing-folks.blogspot.com/

  2. #2
    Join Date
    Nov 2004
    Location
    quitecorner,ct.
    Posts
    2,554

    Default

    I fish 4 rods, two 8wts, a 9 and a 10, but I'll use lines from 8-12wt depending on the situation
    One 8 is a 10 footer and is for surf fishing.... the extra length needed for mending over breakers when fishing in close.
    The second 8 is the go-to. Light weight for all day use.
    The 9wt rod gets used the least, but often it's the kayak rod.
    The 10wt gets used mostly when the wind is up ... which can be fairly often around here.
    The simpler the outfit, the more skill it takes to manage it, and the more pleasure one gets in his achievements.
    --- Horace Kephart

  3. #3
    Join Date
    Feb 2000
    Location
    Pacific
    Posts
    1,351

    Default

    I use 6 and 7wts for bay species like spotted bay bass, croaker, bonefish, halibut, and corvina. Inshore saltwater its usually 8 and 9wts for barracuda, bonito, calico bass, sandbass but I have a 10wt rigged and ready for smallish yellowtail. I usually use at least a 9wt around the kelp beds since the muscle compared to lighter rods is needed to lever fish from the kelp. I use a Sage Smallmouth and Largemouth rod for 'yak fishing. Its 10, 11, and 12, and 13s for dorado skipjack, yellowfin, albacore (true albacore) bluefin and bigger yellowtail. For sharks I have used 14 and 16wt rods. Most of these are Sage (RPLX, RPLXi, FLi) and Redington (CPS and older SSF) models. I have borrowed the 14 and 16wt Sage Xi2 rods. I have a minimum of 3 rods in 6,7,8,9,10, and 12wt and usually have at least 4 rods with me when fishing from a boat sometimes 6 or 7, all rigged with different lines and flies.

  4. #4

    Default

    for salt I am very simple...10ft 8wt Loomis GLX for alll things 30lbs and under...8'10" 1 piece Loomis Pro 10wt for everything 30lbs to 200lbs...

  5. #5

    Default

    7wt Cabelas XST. A cannon.
    8wt Fenwick HMG. A pleasure to cast, powerful but smooth.
    I'm a happy man in the surf with these weapons, the sun in the horizon and the line in the air.

  6. #6
    Join Date
    Jun 2008
    Location
    Broussard, Louisiana
    Posts
    613

    Default

    For speckled trout (spotted weakfish) and smaller reds or flounder an 8 wt. Quarro, Loomis or Albright.
    For jacks and small tarpon, snook and similar a 9 or 10 Albright overloaded by one line weight.
    Albrights are at least 5 pieces for easy traveling.

  7. #7
    Join Date
    Apr 2001
    Location
    Palm Bay, Florida/Rock River Wyoming, USA
    Posts
    284

    Default

    Dave E--good to hear from you, it's been awhile due primarily to my absence, I'm sure.
    The ease of casting is why I favor those BL-5s. They cast like a rod two to three wts below their listed weight due to lightness and the soft tip. On the other hand they are still expensive, even after being off of the current offerings list for several years, from Winston.
    Good Fishing,

    Chuck S (der Aulte Jaeger)

    "I've traveled a long way and some of the roads weren't paved"

    http://fishing-folks.blogspot.com/

  8. #8

    Default

    I use 9-10.5 foot rods 3wt to 8wt with lines from 5wt to 13wt. Most of the work going to 10.5 foot 6wt rods with 9-11 wt lines. All for New England striped bass. Fishing conditions range from tiny water under-road culverts to big water ledges and cliffs.

    I like my rods long, slow, and soft. It is tough finding heavier wt rods with those characteristics hence, why I stick with the lighter sticks.

    I do like to play with an old 8ft fiberglass rod with ceramic guides in the salt that I got from someone throwing out their outdated old trout rod. It sings with a 5 wt peach Corltand line.

  9. #9

    Default

    Quote Originally Posted by Micropteris View Post
    I use 9-10.5 foot rods 3wt to 8wt with lines from 5wt to 13wt. Most of the work going to 10.5 foot 6wt rods with 9-11 wt lines. All for New England striped bass. Fishing conditions range from tiny water under-road culverts to big water ledges and cliffs.

    I like my rods long, slow, and soft. It is tough finding heavier wt rods with those characteristics hence, why I stick with the lighter sticks.

    I do like to play with an old 8ft fiberglass rod with ceramic guides in the salt that I got from someone throwing out their outdated old trout rod. It sings with a 5 wt peach Corltand line.
    wow...I have never heard of such radical line overloading but if it works...what kind of rods are they? if I am reading this correctly you overline by as much as 5 line sizes?does your rod throw the lines far? and also how big are the fish? do you need a bigger reel? sorry for all the questions but I am very interested

  10. #10
    Join Date
    Apr 2005
    Location
    North East, MD
    Posts
    283

    Default I like them fast and light; but, not too fast!

    St. Croix Legend Elite in 6 wt for schoolie striped bass and blues, 9 wt and 10 wt. for bigger fish, bigger flies and windy days.

    Sage RPLXi2 in a 7 wt. for Florida! It does it all nicely.

    Australian 2 handed surf fly rod, 8 wt x 12.5 ft. for the surf! Wow, it's easy to cast and catches fish. While this is primarily and overhand rod, the extra length makes it easy to roll cast. I can stroll down the beach and roll cast (blind) into the surf without a backcast and cover more water quickly.

+ Reply to Thread

Similar Threads

  1. Saltwater flyrod
    By Saltamontes in forum Saltwater Fly Fishing
    Replies: 8
    Last Post: 03-19-2014, 06:13 PM
  2. Rods from Midwest Custom Rods
    By Whitewolf in forum Sound Off
    Replies: 7
    Last Post: 01-04-2013, 02:00 PM
  3. Saltwater @ 5wt.?
    By Jim Sentell in forum Saltwater Fly Fishing
    Replies: 14
    Last Post: 12-07-2007, 03:57 PM
  4. Gonna Try Saltwater
    By dreaton in forum Saltwater Fly Fishing
    Replies: 7
    Last Post: 09-22-2006, 05:38 PM
  5. Redington Nano Titanium Quartz "NTiQ" Saltwater Fly Rods
    By LadyFisher in forum Saltwater Fly Fishing
    Replies: 0
    Last Post: 12-24-2005, 12:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts