Sharing Knowledge , Wood is Good
Been working wood and copper smithing for a long while, keeps me busy and happy on my day off.
To some it may be just a pile of scraps and that is all well and good.
But as for me wood is good :)
http://flyanglersonline.com/bb/attac...4&d=1594494783
This wooden tool chest I crafted from an old water tank a good friend gave me.
I modeled it for my Son after his grandfathers kennedy tool chest..
Redwood , purple heart and copper.
Just thought some fly fishing craftsmen might be interested.
http://flyanglersonline.com/bb/attac...1&d=1594489724
http://flyanglersonline.com/bb/attac...2&d=1594489725
http://flyanglersonline.com/bb/attac...9&d=1594489721
http://flyanglersonline.com/bb/attac...0&d=1594489722
Shown above - Family Crest"
My Grandfathers Gold railroad pin
in front of a Purple Heart Stake with Thin Blue Line
Gathered between silver forged letters
mounted on a Granite and copper frame base...
------------------------------
Side note:
I perfected a known process to etch the copper to add lettering & patina .
Uses salt , standard black & white laser printer, with a touch of corn meal baked to a golden brown to
make dextrin.. The process involves baking and cooking the cornmeal to form a coating that is applied to
printer paper once dry you print the image or lettering to make a resist for the electro etching process.
Then Iron on the resist to the copper piece. Its take a while to get it just right , but worth it.
and the process is [u]much more friendly to work with over harsh chemicals used with other methods.
http://flyanglersonline.com/bb/attac...8&d=1594491726
http://flyanglersonline.com/bb/attac...4&d=1594491582
http://flyanglersonline.com/bb/attac...2&d=1594492949
The black laser ink is attached with heat to stick to the copper forming an insulator ( a resist ) the
etching process now eats away at the copper leaving raised letters that will buffed afterwards.
http://flyanglersonline.com/bb/attac...1&d=1594492927
