Flats Boat Poling 101By Tom Mitzlaff, Jacksonville, FL
First, let me say there is no better way to approach and catch fish on shallow water flats or in shallow creeks, than to use a push pole, and pole quietly, in a flats boat until you are in casting range. It will amaze you how close you can get to Redfish, bonefish, anything when you are in a quiet skiff and poling it along. I have poled across a flat and had fish literally jump out from under us, all by using a push pole, and being QUIET !!We will not try to give you all the details of poling here, our focus is to help you beginners with the basics to get you poling a skiff effectively enough to catch fish.
Poling a skiff across a flat should not intimidate you, it is actually quite easy once you know a few basic concepts.
In order to effectively pole a skiff and hold your position a few key pointers will greatly help you understand and learn the basics. Let's get started.
Remember, you are propelling the boat from the transom. In order to go in a straight line towards your targeted area, you must first point the boat in the right direction by turning it with the pole, actually pushing or spinning the rear of the boat until it is pointed towards your heading. It is comparable to backing up your car because you are steering from the rear. This concept can be easily demonstrated.
Lets do an experiment. Grab a book and put it on the table or desk in front of you. Place a finger on the end of the book, centered left to right, on the edge of the book. This is like the position of your poling platform - the rear center of the boat. Only use one finger and try to push the book in a straight line. Notice how you have to alter the direction slightly in which you push to keep it traveling in a straight line?
First things first. A point I want to make clear, which will make things easier on you while learning is this; when you are poling a skiff remember that your goal is to get to the point you are aiming at, not keeping the boat in a perfectly straight line, in other words the boat may move in the right direction, say south, but it may actually be pointing south-south east, get it? Look at the drawing. The wind and tide will make the boat ‘crab’ along in a yawed or crooked position as you are poling. This is important as if you are poling a flats boat cross wind and trying to keep the boat ‘pointed’ in the right direction, you will most likely be headed in the wrong direction. Look at the illustration, your boat is pointed at ‘A’ but your poling towards ‘B’. There is nothing you can do about this, except get used to it. This is only the case when the wind or current is yawing or turning the boat. In calm conditions you should be able to push your boat in a straight line and keep it pointed in the same direction.
The next point (and a very good one) I would like to make is positioning your push pole. This is very important. Always try to keep your push Pole foot as close to the engine as possible. Imagine a hula-hoop tied to your transom, in the center, dragging behind the boat just past the prop of the engine (with the engine tilted), on the water. This circle is where you should always place your pole in the water and push the foot straight to the bottom. The closer you place the foot of the pole to the transoms center ,the easier it is to pole the boat straight, and travel in the direction you want to. To turn the boat you only need go off center slightly or to the rim of our imaginary hoola-hoop to make quite a snappy turn. The only time you really need to go out of this circle is to do an immediate 180 turn or to stop, or avoid an object, but we won't deal with these topics here. If you concentrate on keeping your pole foot close to the skiff when you place it, you will have come a long way towards proper technique.
Now as far as pushing the skiff, TAKE YOUR TIME WHEN LEARNING! Most people use far to much force when trying to learn and push the skiff all over the place zigzagging, only to get frustrated.
When your push pole foot contacts the bottom gently push the boat forward, keeping your pole in line with the center of the boat, remember you must push or apply the force in a line with the center of the boat or where you are headed, otherwise you will push the boats transom off to the left or right pointing the skiff in the wrong direction. Walk your hands down the pole as you apply force, and bingo - off you go! If you push the skiff and it goes off to one side, pick up the foot and place if a little off center towards the side the transom is moving to get your boat back in line with your target. This is a constant process that you will get used too. Just remember, take it SLOW and easy while you are learning and you will soon master the art of poling your skiff. Just remember to keep the pole behind the skiff in the ‘hoola-hoop- and keep it in straight line with the boats center line...these two hints will help you greatly.
One more item I will address. To stop the boat push your foot into the bottom and gently ‘walk your hands down the pole’ pulling it to a stop. This takes a little practice. You can also place the pole up in front of the boat or to its side and stop but this takes practice to keep the boat from spinning. These are things easily learned though once you master the basics.
I hope this article helps you learn the basics of poling. With a little practice you will soon learn it is not as hard as some people may think.
Good Luck !
~ Tom Mitzlaff, President
|Previous Fly Fishing The Salt Articles|
[ HOME ]
[ Search ] [ Contact FAOL ] [ Media Kit ]
FlyAnglersOnline.com © Notice