to see if the rel is reversable, remove the line spool. looking at the spool shaft, attached to the reel body, you should see a nylon/teflon bushing with a number of slots in it around the spool shaft. if the reel is reversable you should see two small screws holding the bushing onto the reel body. remove the screws, pull the bushing off of the reel shaft and turn it over. re-install the screws. you have now changed the direction of the reel.

i might caution that when you remove the pushing, it will uncover a spring loaded pin. dont loose it and make sure it is in its hole when you reinstall the bushing. without the pin, the drag will not work.

good luck