It is a simple thing to build and epoxy ramp to create a hosel. You can use devcon 2part expoy (recommend the 2 ton stuff) use a flat mixing stick to mix the epoxy and apply it to that area. You can turn the rod by hand and build a ramp with the epoxy ,tapering it down from the handle to the rod. While the epoxy is still wet , use a cloth (or your finger)saturated with denurtured alcohol and smooth the epoxy out while tapering it down to the blank. Thus you have built your ramp or hosel. Note if you want to color the ramp, you can mix a couple drops of testors model paint into the epoxy when you mix it. This way you can make the ramp any color you want.