+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: How to sand down grip

  1. #1
    Join Date
    Jun 2003
    Location
    north carolina
    Posts
    250

    Default How to sand down grip

    I recently had a rod built but the handle is Way to large(thick) compared to the factory handle but was told by builder he could not turn down because it could not be chucked up.So can I take sandpaper and sand it down myself if so what grit,because it won't get used like it is now.

  2. #2
    Join Date
    Mar 2004
    Location
    Nunica Mi U S A
    Posts
    2,526

    Default

    Return the rod! Get one built the way you want it. A competent builder should be able to change the grip. If you approved of an oversized grip it can be removed and replaced for a fee. If you didn't, then don't accept the rod.
    I can think of few acts more selfish than refusing a vaccination.

  3. #3
    Join Date
    Jun 2009
    Location
    Littleton, Colorado
    Posts
    2,256
    Blog Entries
    3

    Default

    Absolutely! Return the rod. It CAN be chucked up and turned down a bit for you. If he can't chuck it up, he needs to remove it and turn it down, turn a new grip, or otherwise fix the issue for you. Maybe he can pay another builder to fix the grip for you.
    Last edited by kbproctor; 01-01-2014 at 07:42 PM.
    Kevin


    Be careful how you live. You may be the only Bible some person ever reads.

  4. #4
    Join Date
    Feb 2006
    Location
    Nampa, Idaho USA
    Posts
    1,362

    Default

    wow I don't know who built the rod for you but any builder would be able to make this right. Any builder that says it can't be turned down needs to step back and fix his/her mistake. sorry to hear of the misfortune. to sand the cork I start with 80 grit to form the grip. then I go to 100 and take it down to 600 grit to make it nice and smooth. hope this helps

  5. #5
    Join Date
    Dec 2002
    Location
    Lakeland, FL USA
    Posts
    2,199

    Default

    Like the others said, any experienced rod builder should be able to sand down a grip. There are mandrels that fit different sized holes in the cork. http://www.anglersworkshop.com/grip-...s-1-4-1-2.html He would slip the grip onto the appropriate sized mandrel mount it on his lathe, and it shouldn't take him more that 15 minutes to sand the grip to he proper size. Then he simply uses finer grade paper until he has the grip nice smooth. Now that he has assembled the rod, the process is much more complicated because he has to remove the reel seat and grip. His problem, not yours.

    Jim Smith

  6. #6
    Join Date
    Aug 2010
    Location
    Avondale Arizona
    Posts
    181

    Default

    Quote Originally Posted by Thomas View Post
    I recently had a rod built but the handle is Way to large(thick) compared to the factory handle but was told by builder he could not turn down because it could not be chucked up.So can I take sandpaper and sand it down myself if so what grit,because it won't get used like it is now.
    Appears to me that you told the builder you wanted it slightly larger than the factory grip.

  7. #7
    Join Date
    May 2001
    Location
    ann arbor mi, usa
    Posts
    383

    Default

    even without removing the reel seat it could be chucked and mounted with some steady rests then turned down. I've done it before on a rod I bought and didn't like the grip on. just need to becareful and take your time. any decent custom rodbuilder should be able to do this. However it should have been done right the first time.
    The only things we permanently keep, are those we give away-Waite Philips

  8. #8
    Join Date
    Aug 2010
    Location
    Avondale Arizona
    Posts
    181

    Default

    Quote Originally Posted by cheffy View Post
    even without removing the reel seat it could be chucked and mounted with some steady rests then turned down. I've done it before on a rod I bought and didn't like the grip on. just need to becareful and take your time. any decent custom rodbuilder should be able to do this. However it should have been done right the first time.
    It was done right the first time, he told the builder he wanted it slightly larger than the factory grip. I know this builders reputation, and you get what you ask for.
    Last edited by Goduster; 01-21-2014 at 12:11 AM.

  9. #9
    Join Date
    Jun 2009
    Location
    Littleton, Colorado
    Posts
    2,256
    Blog Entries
    3

    Default

    Having talked with both sides of this issue, I think this should explain the confusion. I jumped to conclusions with my first post and was wrong. My deepest apologies.


    The top grip is similar in size to what was made.


    The middle grip is a plain old factory grip from Mudhole.


    The bottom grip is what Thomas likes and was calling "factory." It is considerably smaller than anything any builder I know would call "factory" even though the rod came from St Croix with this grip.


    There were two very different definitions of "factory" in play here. Thomas clearly got what he asked for but not what he thought he was asking for.




    Kevin


    Be careful how you live. You may be the only Bible some person ever reads.

  10. #10
    Join Date
    Mar 2004
    Location
    Nunica Mi U S A
    Posts
    2,526

    Default

    While there was clearly some miscommunication here it is clear that Thomas has a custom rod that he feels he cannot use. I don't understand why the builder says it can't be fixed at a reasonable cost. For what it is worth I think that the blame for the problem probably rests with both parties. If Thomas could have been clearer about what he wanted, the builder should have been sure that he understood what was being asked of him. If he was building a grip on the St Croix blank to be bigger than a factory grip he should probably (in hindsight) have checked the grip on the factory rod. I don't know how acrimonious their discussions have become but if they can still work together I would think that a repair at a reduced price would be fair
    I can think of few acts more selfish than refusing a vaccination.

+ Reply to Thread

Similar Threads

  1. Cleaning out the sand box..
    By LadyFisher in forum Fly Anglers Online
    Replies: 14
    Last Post: 12-21-2012, 09:09 PM
  2. A 3-wt, a popper, and a calm sand pit
    By quivira kid in forum Warm water Forum
    Replies: 4
    Last Post: 09-17-2010, 09:50 PM
  3. Waders- what foot type for streams and surf? (rocks+sand)
    By MuddlerMinnow in forum Fly Anglers Online
    Replies: 6
    Last Post: 09-22-2006, 01:26 PM
  4. sand bass report
    By rrhyne56 in forum Warm water Forum
    Replies: 16
    Last Post: 02-10-2006, 04:26 PM
  5. Who wants to kick some sand around?
    By anglerdave in forum Sound Off
    Replies: 44
    Last Post: 10-04-2005, 10:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts