+ Reply to Thread
Results 1 to 4 of 4

Thread: Polish Woven Nymph SBS

  1. #1
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default Polish Woven Nymph SBS

    As payment for services rendered to a friend, I present a first, half-a.sed attempt at a woven Polish nymph; a ScottP always pays his debts. Lots of real good videos and SBS's out there (heck of a lot better than this).




    hook - Dai Riki 135 #10
    weight - .025 lead-free
    thread - Danville 6/0 brown
    underbody - Uni Strech brown
    body - embroidery floss brown & yellow
    rib - copper wire small
    thorax - hare's ear/antron dubbing
    head - 1/8" brass bead black


    Part 1



    Mash down barb and slide bead on shank





    10 wraps of lead-free; jam it inside the bead





    Unit stretch to create smooth underbody





    tie in rib





    dark matter on the far side





    light on the near side





    invert hook and grab both strands of floss (constant tension is key here; lack of is the reason this fly came out a bit shakey)





    *note - some of the following pics are a bit out of focus; hard to hold 2 strands of floss and camera at the same time




    cross light across the bottom (topside in the inverted world)





    dark over light and then across the top (underside in the inverted world)





    repeat


  2. #2
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default

    Part 2


    and so on





    and so on





    attach tying thread, tie off floss and trim





    uninvert fly





    and spiral ribbing up body





    split thread (I like the effect better than just dubbing the thread)





    insert dubbing






    spin bobbin to trap dubbing





    wet fingers and stroke dubbing back while wrapping





    whip finish and brush with Sally





    Kind of fun to try something different like this. Next time the floss is going to be spooled so I can use bobbins; much easier to maintain tension for a more uniform body.






    Regards,
    Scott

  3. #3
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default

    Spooled the floss and used the bobbins on this one:




    Probably doesn't show up very well in the photo, but it was much easier to maintain tension and get a tighter weave. Hopefully, they'll get better as we go along.

    Regards,
    Scott

  4. #4
    AlanB Guest

    Default

    Well done, thats a very difficult technique to illustrate in a step by step.

    If you want something interesting to try with this, weave white Unifloss (doubled strands) over UTC Fl. Fire Orange under body. Once tied wet it! First time I fished it, it took about 50 trout. It is the only fly I have had fish just swim over and pick up before I even made a cast. Just dropped my leader in the water while I sorted out my line. This hasn't happened once but three times on different waters.

    You are right it does take a lot of practise to get good consistent results. I've tried the bobbin method and found I prefer to use the method you showed. The weight of the bobbin tended to make the floss twist into a rope. The open ends in your method let the twist fall out of the threads.

    Cheers,
    A.

+ Reply to Thread

Similar Threads

  1. Woven panfish fly variations
    By Rick Z in forum Fly Tying
    Replies: 5
    Last Post: 02-18-2019, 01:50 PM
  2. Woven SH and a leech
    By Rick Z in forum Fly Tying
    Replies: 2
    Last Post: 03-17-2017, 11:56 PM
  3. Woven midge
    By Rick Z in forum Fly Tying
    Replies: 2
    Last Post: 02-07-2013, 01:58 PM
  4. Some Woven Bodies
    By PRM in forum Fly Tying
    Replies: 7
    Last Post: 06-20-2010, 12:17 PM
  5. Woven fly patterns
    By perch in forum Fly Tying
    Replies: 4
    Last Post: 05-21-2007, 03:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts