+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: epoxy drying gadget

  1. #1
    Join Date
    Dec 2003
    Location
    Thuwal, Saudi Arabia
    Posts
    1,290

    Default epoxy drying gadget

    i'm finally going to break down and buy something to help dry my epoxy flies. staying true to my cheap nature, i have no intention of paying $50 plus for some battery powered piece of junk. any suggestions on making one? i've heard rotissery motors are good, but it's not a very common yard sale item. anyone have a tip for an electric motor (plug in) that would fit the bill???

  2. #2

    Default

    dave
    watch for old sewing machines. Trash days in a nice neighborhood can be very productive. Take the foot pedal as well.

    Also great for wrapping rods.

    Larry

  3. #3

    Default

    Cabela's has a dryer motor for 22.99 in the tackle craft catalog. Buy a foam disk at your local craft store

    ------------------

    Bill

  4. #4
    Join Date
    May 2003
    Location
    London, England
    Posts
    197

    Default

    Dave,

    This might help...

    First appeared here... [url=http://ukswff.proboards26.com/index.cgi?board=fly2&action=display&thread=1098348 516&page=1:a645e]http://ukswff.proboards26.com/index.cgi?board=fly2&action=display&thread=1098348 516&page=1[/url:a645e]

    Then four months later... [url=http://globalflyfisher.com/tiebetter/epoxy_rotor/:a645e]http://globalflyfisher.com/tiebetter/epoxy_rotor/[/url:a645e]

    Personally I went out and bought a Stonefly driers for about $40


    ------------------
    JME
    @===----?----?----?
    Member of B.A.S.S [url=http://www.ukbass.com:a645e]http://www.ukbass.com[/url:a645e]

  5. #5
    Join Date
    Dec 2003
    Location
    Thuwal, Saudi Arabia
    Posts
    1,290

    Default

    thanks guys! bill, i checked out that motor and found one on ebay for $10; JME, i'll use the plans you gave the link to make the set up. and, larry, liked your idea but figured i'd better not take apart the bride's sewing machine...

  6. #6
    Join Date
    Jun 2003
    Location
    Anderson, South Carolina (Northwest corner of SC) USA
    Posts
    2,523

    Default

    Dave,

    When you get this puppy put together, please share some pictures with the rest of your bargain-basement compatriots. I've been planing to make one of these for the last year and a half.

    Excellent choice on the bride's sewing machine, BTW! 8T

    ------------------
    You had better learn to be a happy camper. You only get one try at this campground and it's a real short camping season.

  7. #7
    Join Date
    Jun 2001
    Location
    Santa Barbara, CA, USA
    Posts
    504

    Default

    There is a guy who sells on eBay and direct. He has motors and complete kits for drying machines. Very good prices! His name is John Fleisher and he is great to do business with. His email is:
    calljmf@sbcglobal.net

    ------------------
    Joe

  8. #8
    Join Date
    Nov 2004
    Location
    Dividing Creek, NJ, USA
    Posts
    84

    Default

    I was going to try sticking my epoxy's in the side wall of my truck tire and drive slowly around the block a couple times. That might work.

  9. #9
    Join Date
    Jun 2003
    Location
    Anderson, South Carolina (Northwest corner of SC) USA
    Posts
    2,523

    Default

    Splitditch,

    I don't think that even Dave himself has thought of that particular solution. Congratulations, you've out Daved even Dave! 8T

  10. #10
    Join Date
    Apr 2004
    Location
    Deltona, Florida, USA
    Posts
    512

    Default

    Pictures??? Micus is too cheap to buy a camera!AAARRRGGGHHHH! Ah hell Dave, go ahead and wreck the bride's sewing machine...will make a fine story for next month (when you get out of the hospital!)

+ Reply to Thread

Similar Threads

  1. My new drying cabinet
    By Midwest Custom Fly Rods in forum Rod Building: Cane and Graphite
    Replies: 6
    Last Post: 01-02-2012, 07:36 PM
  2. Rod wrapping/drying jig
    By jimsnarocks in forum Rod Building: Cane and Graphite
    Replies: 4
    Last Post: 09-04-2010, 10:25 PM
  3. Another drying motor tip
    By ducksterman in forum Fly Anglers Online
    Replies: 3
    Last Post: 08-03-2010, 02:28 PM
  4. drying patch
    By hunterdau2 in forum Fly Anglers Online
    Replies: 2
    Last Post: 04-11-2009, 02:34 AM
  5. drying motor
    By Saltamontes in forum Rod Building: Cane and Graphite
    Replies: 4
    Last Post: 02-23-2008, 12:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts