Fatman,
On the blue cutter, what is the blue insert that is there? I would like to try making one, but I need to thin it all the way through first! That is way there is a lot of noise on the other side the wall and a bathroom is getting gutted and redone, not by me!!!
Thanks,
Mike
When I made the smaller ones I got some mini box cutting blades at Home Depot and that's the case the blades came out of. You have to pull the pegs out that hold the blades in when you buy em, and then drill a hole for the screw but it works good.
Fatman, Great series of photos on the entire process of making zonker strips! I've made a couple of different cutters, but I like the one that uses the large fender washers as designed and shown by ducksterman the best so far.
Jim Smith
Thanks - I like the one by ducksterman too but using just those limits you to the thickness of the washers. If you need other sizes that are smaller you have to make a different style.
One that I really like but don't have the tools to make it is this one shown on a saltwater fly tying site
http://blog.saltyflytying.com/zonker...-this-at-home/
Posting Permissions
Reply With Quote