Matuka Tips?

[melk]

Hi all,
As we work our way in fly tying class, the coming week is Matukas. As I do the demoing, trying not to elicit too many laughs, I have been turning out some Matukas. I think I'm getting it, but any tips on getting the wire/ribbing on through the wing better? I have moistened the hackle and stroked it to the front, but the ribbing still seems to not want to go on evenly. I have found that waiting until the fly dries does improve its' looks, of course it will be wet when I fish them!
Thanks,
Mike

[mr. blur]

are you wiggling the wire back and forth as you wrap as you do while counter wrapping the rib on a bugger?

[ScottP]

Mike,

I use a bodkin to open a slot in the feather for the wire; seems to work okay. Here's a few pics from the Brown Trout Parr SBS I put together a while back



prepare 2 well-marked feathers per side; measure for length and strip fibers off one side (except for tail)







tie in wing at head





pull wing back along hook, spread fibers at tail





wrap wire, Matuka style, through wing to the front; helicopter wire and tie off




Didn't mention the part about the bodkin, but that's how I did it; hope this helps.

Regards,
Scott

[melk]

Scott - THANK YOU, that helps a lot! And also to you, Mr Blur, yes I wiggle, but obviously not enough! Scott, may I copy those pics and use them in class on Wednesday to help illustrate?
Thanks to you both,
Mike

[ScottP]

Mike,

Sure. Here's the link to the SBS, too:

http://www.flyanglersonline.com/bb/s...Trout-Parr-SBS

Regards,
Scott

[rainbowchaser]

To get a fuller wing silhouette don't strip the fibers from the bottom of the wing feathers. After putting them together to form the wing grasp them by the rounded end that will be the tail. Stroke the fibers from the bottom up so they are outside the top fibers. Finish as usual. This method was given in TYING THE SWISHER RICHARDS FLIES BY Doug Swisher and Carl Richards. I find that I like the results better than when stripping the bottom of the wing.