+ Reply to Thread
Results 1 to 10 of 11

Thread: Christie's EP (EasyPeasy) Dun variation SBS

Hybrid View

  1. #1
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default Christie's EP (EasyPeasy) Dun variation SBS



    Took some liberties with Roy's fly http://www.flyanglersonline.com/flyt...103104fotw.php
    subbing .5mm razor foam for the abdomen/thorax cover. From what I've read, the hooking problems with USD flies, noted by Steven on the Mosley Olive Dun thread

    Quote Originally Posted by Steven View Post
    I can't say from personal experience, but Datus Proper wrote in What the Trout Said, that upside down dries were poor hookers.
    can be somewhat alleviated by off-setting the hook point and keeping the wing soft, sparse and somewhat forward.
    Tied here in March Brown colors, change to suit your needs.


    hook - Dai Riki 270 #12 (Roy uses longshank grub hooks, which I'm fresh out of)
    thread - MFC 8/0 brown
    tail - hackle fibers brown grizzly
    rib - Gudebrod rod-winding thread brown
    abdomen/thorax cover - .5mm foam tan
    wing - Congo Hair white
    thorax - dubbing tan
    hackle brown grizzly


    Part 1


    off-set point and add a little curve to the front of the hook shank






    tie in thread and wrap back about halfway down hook bend






    even up the tips of a few hackle fibers, measure for length (shank) and tie in






    tie in ribbing




    taper foam strip (1/2 gap width) and tie in




  2. #2
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default

    Part 2


    wrap foam forward and tie off (no need to glue the foam since it's going to be ribbed)




    rib abdomen, tie off and pull foam back






    take a sparse hank of Congo Hair and tie on underside (which is actually the topside on an upside-down fly) at 80% mark; a bit farther forward than normal, but, as noted, trying to improve the hooking




    pull down (or up, depending on orientation - very confusing) and add a few posting wraps to gather the wing




    tie in hackle




    dub thread (sparse), dub thorax






    wrap hackle through thorax, tie off and trim


  3. #3
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default

    Part 3


    pull the foam forward, splitting the hackle down the center stripe; tie off, trim, half hitch x 2, SHHAN






    trim wing and have at it






    Regards,
    Scott

  4. #4

    Default

    Nicely done Scott. So for anyone who's fished a USD pattern, what makes it land hook-point up?

  5. #5
    Join Date
    Jul 2004
    Location
    Ashburn, Virginia
    Posts
    7,867

    Default

    Curtis,

    Aerodynamics and a lotta hope.

    Regards,
    Scott

  6. #6
    Join Date
    Jun 2005
    Location
    Red River, New Mexico
    Posts
    784

    Default

    And the placement of the hackle. Excellent, Scott. Thanks.

    Joe

  7. #7
    Join Date
    Jun 2006
    Location
    NE Gwinnett Co., GA
    Posts
    5,937

    Default

    Looking at the fly, unless it is really plopped down hard, if it hits hook down, the resultant high CG should result in it rolling over, physics.
    Want to hear God laugh? Tell him Your plans!!!

+ Reply to Thread

Similar Threads

  1. WMD (variation)
    By ScottP in forum Fly Tying
    Replies: 7
    Last Post: 03-20-2019, 02:52 AM
  2. Reversed Poly Para Midge, after Roy Christie
    By AlanB in forum Fly Tying
    Replies: 3
    Last Post: 06-28-2014, 12:53 PM
  3. Roy Christie Reverse Parachute
    By texfly in forum Fly Tying
    Replies: 16
    Last Post: 09-19-2011, 07:34 PM
  4. First Try at a Roy Christie Emerger
    By Ron Eagle Elk in forum Fly Tying
    Replies: 10
    Last Post: 03-10-2009, 06:04 AM
  5. Roy Christie's postless parachute
    By herefishy in forum Fly Tying
    Replies: 1
    Last Post: 01-21-2007, 07:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts