King Kong Hopper SBS

[ScottP]

Conspicuous consumption meets wretched excess. Tied here in salmonfly colors; change as you see fit.




hook - Mustad 79580 #2
thread - UTC 140 hot orange
tail - rubber brown
body - 2mm foam rust, orange, dark brown
wing - elk hair
indicator - 2mm foam orange
legs - rubber medium orange barred




Part 1

poke a hole in rust foam strip (hook gap wide), mash barb and slide on hook (most pics I've seen have all 3 layers on top, but when I try that, I get a lot of rolling, even with liberal amounts of Super Glue; mounting the bottom layer underneath the hook gives me a more stable base)







attach thread at head and wrap back to bend





1 soft loop, pull slowly but firmly (to keep from cutting the foam) to create first segment





lay second layer of foam and tie down; repeat with top layer







cross over the top and wrap back (slow, gentle pull to create segment)







insert rubber for feelers

[ScottP]

Part 2


create another segment back, pull feelers back, trapping rubber against side of body






cross wrap over top, moving forward to initial tie-in




move thread forward, tie down bottom foam, then the other layers, one at a time (lost the pic for top layer, please use imagination)








repeat; at this point you should be at the 50% mark

[ScottP]

Part 3


clean, stack and measure (gap width past the bend) a clump of elk; tie in, trim butts






tie in indicator (a little narrower than body foam)




tie in legs




repeat

[ScottP]

Part 4

poke another hole in bottom foam at eye, pull foam up and tie down






create last segment













half hitch x 2, SHHAN




trim front/back foam, trim tail and legs; keep away from blondes and Empire State Building






Regards,
Scott

[Joe Billingsley]

Holy Mackerel, those 79580's are long hooks.

Joe

[ScottP]

Big bug, big hook. Hardest thing about fishing the salmonfly hatch is not slapping your neck when those bugs are crawling on it. Really, not kidding; yuck!

Regards,
Scott

[ducksterman]