+ Reply to Thread
Results 1 to 6 of 6

Thread: New Board

  1. #1
    Join Date
    Aug 2007
    Location
    Tullahoma, TN
    Posts
    2,455

    Default New Board

    I've been wanting to build a furling board that is easier to transport. I had a unused tool box that I felt I could fit the board into with all the tools and materials.
    I wanted a board that would allow me to make 30", 4', 5' and 6' 6" leaders (which my current board will do) but have it fit into a 20" tool box!
    Now came the hard part!! What length should each section be?? After all I had to take care not to have the section connectors overlap one of the pegs!!
    I also wanted to keep it as simple as possible (Remember KISS?). I took the better part of an afternoon to determine that sections of 20"/20"/16"/16"/16" would fill the bill.
    Now this board is/has to be special (as in work of art!). I started with an 8' "Select" 1"x4"x8" pine board.
    After cutting the sections to length each was given 3 coats of clear polyurethane (sanded between each coat) also before the second coat all the peg positions were labeled. The sections are connected by highly polished Aluminum "C" channel.
    In a nut shell the thing is so darn pretty I'm afraid to use it!!!

  2. #2
    Join Date
    Jan 2008
    Location
    Bolingbrook, Illinois
    Posts
    31

    Default

    How about a picture Jack?

  3. #3

    Default

    How about a picture, Jack?

  4. #4
    Join Date
    Aug 2007
    Location
    Tullahoma, TN
    Posts
    2,455

    Default

    After making about 2 dozen leaders I had to modify the board!! Problem 1- I used 2" aluminum channel to connect the sections (5) and they did not make the board as ridged as I'd hopped! Problem 2- The natural finish made it almost impossible to see what I was doing with clear mono or fluoro. Problem 3- The high polish on the aluminum looked nice but gave off a of glare
    I'm working on solutions so bear with me.

  5. #5
    Join Date
    Jun 2006
    Location
    NE Gwinnett Co., GA
    Posts
    4,799

    Default

    Try rubbing it with some 00 steel wool to reduce the shine on the finish and the aluminum. If that doesn't work there is always flat black Krylon.
    It's easier to fool people than to convince them that they have been fooled. Mark Twain

  6. #6
    Join Date
    Jan 2008
    Location
    Bolingbrook, Illinois
    Posts
    31

    Default

    Did you ever finish your new board yet?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts