Here is a suggestion: Throw away the crazy glue and masking tape for future guide wrapping projects. Use this method instead.
At any major craft store, you can buy a product called "Streatchy String". It comes in different diameters. (I prefer using the thin stuff). Cut a piece 10" long. Tie an overhand knot on the blank, move the guide into position and slide the string over it.
Taking the loose end wrap it over the guide foot several times and cinch it down with another overhand knot or two. In the case of a double foot guide , do both feet. ...Now your guide is fastened. Start your wrap and when you get to the string , use a razor and touch the string . It will comes right off, then finish your wrap. One thing nice about using this stuff is that the guide can be repositioned at anytime and leaves no trace when removed. Good Luck and happy building!


[This message has been edited by Smernsky (edited 17 May 2005).]