-
Rhody Chovy SBS
My take on Page Rogers bay anchovy pattern. I've had real good luck with this on schoolie stripers; haven't had the chance to try it on albies since they started getting selective during the Snot Fly hatch. I've used calftail, bucktail, arctic fox (my favorite of the naturals) with good results, but if there are any blues around, you'll want synthetic; Craft Fur on this version. Also, I used 5 min epoxy on early versions, but had a number of them discolor after exposure to sunlight, so I switched to UV Knotsense; I'm sure Clear Cure Goo would work great, too. Although the original is tied with stick-on eyes, I like the bead better; doesn't add too much weight but seems to make the fly track better in the water - YMMV
hook - Mustad 34007 6-8
thread - Danville mono, fine
tail - Craft Fur white
body - Mylar Braid, fine pearl
topping - Krystal Flash rootbeer
eye - 1/8 brass bead silver
Part 1
Mash barb and slide bead on hook
attach thread behind bead and tie in Craft Fur wing (keep it sparse)
slip body braid over hook eye in front of bead
wrap tying thread in front of braid (don't worry about crossing over the bead, it's going to be covered with the UV Knotsense)
3 strands Krystal Flash
tie KF in at eye
wrap thread back and tie down body braid on top
and on the bottom
Last edited by ScottP; 10-31-2012 at 08:04 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules