over-lining a rod, or how to turn a 6wt into an 8wt?

[pillcaster]

I came across this review on the Orvis site:

http://reviews.orvis.com/7532/9444s/reviews.htm

The part I found interesting is this:

"I got this rod mainly so I could throw larger top water flies at big bass. This rod does that so well because I can upline it with 8 wt. Bass Wonderline on an extra spool for my black Battenkill Mid Arbor IV reel, that's something you can't do with any fresh water 6 wt. I do use 6 wt. line when fishing for bass but if you want to throw the big poppers, you need a bigger line and this rod throws them far and accurately."

My BVK 6wt with a SA bass bug wf7f and I struggle throwing the big size 2 and 4 wind resistant Walt's poppers, and I was considering adding a BVK 7 or 8 wt to my ever growing collection. When I saw this, I thought, why not give it a try?

So I loaded up my BVK 6wt with an Orvis wf8f bass wonderline that I got off fleabay last fall, tied on a big popper with the hook cut off, and went to the back yard to entertain the neighbors. Much to my surprise, this worked great. I guess it is the line that throws the bug, as long as the rod can accommodate the line. Now, I realize yard casting and river casting is not the same, but it looks like I may have saved $250 on a new BVK....

Anyone else surprised by this? Has anyone had a positive or negative experience with over-lining by 2 weights?

[rel]

I regularly overline by 2 wts when fishing the salt, and I have a couple of rods that will overline by 3 wts and actually cast better than with the regular rated line. Ron

[dudley]

I have a $25 Sportman's Guide 8wt that I used to fish with a 10wt line.
It was short a couple of guides and had a cheap reel seat so I rebuilt it. Now it casts best with an 11 or even 12wt line
You don't know until you try

[branhap]

I think all rod types are a bit different. My main rod is a 6wt, that seems to throw light weight dries better with 5 wt line, however works best with hoppers, and nymph rigs on 6 wt line. Meanwhile I have an Orvis 9wt that has to be overlined 1 to 2 sizes just to cast farther than arm's length. But once you get a powerful enough line, boy can that rod scream out the line.

I wish there was an easy way for me to test cast various lines with each of my rods to help find the sweet spot. *sigh*

[rel]

I think all rod types are a bit different. My main rod is a 6wt, that seems to throw light weight dries better with 5 wt line, however works best with hoppers, and nymph rigs on 6 wt line. Meanwhile I have an Orvis 9wt that has to be overlined 1 to 2 sizes just to cast farther than arm's length. But once you get a powerful enough line, boy can that rod scream out the line.

I wish there was an easy way for me to test cast various lines with each of my rods to help find the sweet spot. *sigh*

If you can get to a fly shop pick up an Umpqua fly line scale @ $20.00. Then you can weigh the lines that work on your rods and match the same weight line to another rod. Of course if you are throwing dries then the line is probably a double taper and you maybe carrying alot of line in the air but you can measure the weightof that amount of line and try a weight forward line that is heavier to achieve the same results. Ron

[tailingloop]

Rod designers assign a line wt rating to a rod based on the line that they feel will work best over the range of conditions that they feel the rod will be used most often. This is very subjective. Most lines are rated based on the weight of the first thirty feet. Extend more line out and you are casting a heavier weight. Cast less line and you are casting less weight and may find it more difficult to load the rod for effortless casting. Many rods are designed to optimally load with 35 to 40 ft of the rated line extended.

The line carries the fly to the target. The larger and or more wind resistant the fly the greater the mass of flyline requiered to effectively carry the fly.

If you are going to be making shorter casts and/or casting larger flies it may be helpful to go up one or two line sizes.

When fishing for bass my casts are usually less than 45 feet including the length of the rod and leader. So I usually upline by one or two line sizes. I regularly use an 8wt line on my 6wt rods, 10wt lines on my 8wt rods and so on.

[jszymczyk]

So your "6 weight" rod performs considerably "better" with an 8 weight line...

THAT PRETTY MUCH MAKES IT AN 8 WEIGHT ROD NOT A 6 WEIGHT

All rods can be cast with a few different line weights, with "modern" fast action rods usually handling heavier-than-rated lines very well. Slower action rods seemingly don't respond quite as well to overlining in my opinion.

So now you have an 8 weight rod with a 6 weight sticker on it, and you can still drop to a 6 weight line if you want a bit more delicacy or if you know you're going to be using just smaller flies.

[redietz]

So your "6 weight" rod performs considerably "better" with an 8 weight line...

THAT PRETTY MUCH MAKES IT AN 8 WEIGHT ROD NOT A 6 WEIGHT

One way of looking at it. Another is that it makes a slower 6 weight.

You're right about all rods being able to cast different line weights. As the poster above mentioned, manufacturers make an educated guess about what line weight most people will like the rod at. You're also right that faster rods handle overlining better, but missed that slower rods handle underlining better.

[NewTyer 1]

I wish there was a fool proof way to know the exact line weight your rod cast best with without buying various lines to try out unless you can return the other lines without a problem.

[JohnScott]

...THAT PRETTY MUCH MAKES IT AN 8 WEIGHT ROD NOT A 6 WEIGHT
....

So ...... you're saying either that Bernard Victor Kreh, better known as Lefty, is either a fool, an idiot, or a liar, or maybe all three ??

If Lefty Kreh is willing to make this his signature line of rods and designate them a certain weight, I think I'll go with him on this, not you, and not write your analysis off as another way of saying it.

Just saying ...

John