extended mayfly body made simple
creating an extended mayfly body:
1.jpg
clamp needle into vise, wax the tip, gently start spinning dubbing around the shaft
2.jpg
stack, then add deer hair, allowing tips to extend past the needle point for tail tips.
3.jpg
build up the body to desired thickness, don't worry about loose fibers.
4.jpg
apply head cement, don't be shy, you want to soak deep into the fibers.
5.jpg
using your finger, smooth all loose fibers down.
immediately after, "push" the body off the needle from the side closest to the vise, place the body in pliers, give body desired curve while drying.
this can be found in the spring 2012 Fly Tyer magazine, just thought i would post for those who don't subscribe to it.... hope it helps, and happy tying!
spoof
ps-these help with weight, since they are hollow.
here is a link to a finished fly using the extended body:
http://www.flyanglersonline.com/bb/s...-extended-body
Last edited by spoof85; 04-27-2012 at 06:59 PM.
if every cast caught a fish, it would be called "catching" not "fishing"