In the picture below, I use an Angler's Image Line Winder & ZipCast on my lines. I have shortened the line length in the picture to best illustrate my method. If you look closely, you can see that after I have spooled my line on the winder, I "loop" the line OUTSIDE one of the winder's "arms" to essentially lock the line in place & apply the ZipCast with 2x2 cotton gun cleaning patches to a taught line. After treating that section of line (usually 2-3 feet), I reel to within a couple inches, "unloop" the line, pull 2-3 more feet out, "loop" it on the arm to lock it again, & treat that section, repeating until the entire line is treated. No repititious washing, drying, treating, etc, etc.....it is all "one step easy"! It's pretty darn fast too.



Any questions, just ask. BTW, when 1 side of the patch gets too soiled, just flip it over. I sometimes can treat 2 lines with one patch.
Mikey