I have an old Pfleuger fiberglass flyrod and the cork grip has broken apart and is missing chunks.I would like to remove the reel seat and replace it and the cork.Eventually I will replace the guides and re-do the entire rod but I have never built a rod or replaced these pieces on one.Does anyone have any advice on how to remove these pieces without damaging the rod?The seat appears to be fastened with some type of epoxy and it seems to be thick.The cork handle will spin on the rod so It should slip off once the seat is removed.There are alot of great rod builders on this site and any advice you can give me will be appreciated.Thanks.
-Steve