+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Beginning Fly Tying Kits

  1. #1
    Join Date
    Aug 2008
    Location
    Jacksonville, Florida
    Posts
    32

    Default Beginning Fly Tying Kits

    Any advice, I looked at Cabelas and Bass Pro, but thought I would run it by here and see if anyone has any suggestions. thanks, Shacked

  2. #2
    Join Date
    Aug 2008
    Location
    Jacksonville, Florida
    Posts
    32

    Default Checked the sponsor site

    and found what I was looking for, sorry to post in the wrong category, saw the fly tying category a minute ago.

  3. #3
    Join Date
    Aug 2007
    Location
    Coeur d'Alene, ID
    Posts
    2,521

    Default

    Shacked;
    You posted that question in the right place. You'll get more responses here.
    Be careful of the "Kits", some are junk and contain tools you don't really need. Check out Hook & Hackle ( sponsor ), you can get the basic tools for around $30.00.
    May I ask what fly's you plan to start with?
    Welcome aboard!!

  4. #4

    Default

    I started with the BassPro kit, most of the stuff in the kit is somewhat sub par but the video is very good. All in all it's a good way to get started but once you get started you're going to want to upgrade everything in the kit.

  5. #5
    Join Date
    Mar 2004
    Location
    Nunica Mi U S A
    Posts
    2,511

    Default

    read this: http://www.flyanglersonline.com/flytying/kit/ and check out the fly tying lessons too. Some of the brand name suggestions may be out of date but the overall list is very good.
    Last edited by rainbowchaser; 08-09-2008 at 06:13 PM.
    I can think of few acts more selfish than refusing a vaccination.

  6. #6
    Join Date
    Jun 2008
    Location
    Fort Collins, CO
    Posts
    4

    Default

    I suggest building your own kit. I received two as gifts a long time ago and found that 90% of the material I didn't use. Make a list of flies you want to tie and purchase the material accordingly. It will save you a lot of time and frustration in the long run. Good luck and tying is a great hobby.
    Pat

  7. #7
    Join Date
    Sep 2007
    Location
    Western Washington
    Posts
    2,040
    Blog Entries
    27

    Smile Tying

    Shacked,

    The best thing you can do for yourself is to join a fly fishing club. Many people don?t have that option since they don?t have any clubs close to them but you are in luck. Jacksonville, Florida has a club you can join, the First Coast Fly Fishers.

    Check out their web site at: http://www.fcff.org/

    If they are a proactive club, and it seems they are, they will have fly tying classes to offer, plus many tyers from which you can draw some important tying data.

    Also, local fly shops will usually offer tying classes for a fee.

    And, don?t forget the FAOL tying lessons in the Fly Tying selection.

    FAOL shows you what a basic kit should have: http://www.flyanglersonline.com/flytying/kit/

    And they have some great beginning, step by step type lessons for you to learn from:
    http://www.flyanglersonline.com/flytying/beginners/

    Hope you have fun.

    Larry ---sagefisher---
    Organizations and clubs I belong to:

    Fly Fishers International Life Member
    FFI 1000 Stewards member
    FFI Presidents Club
    FFI Fly Tying Group Life Member

    Washington State Council FFI
    V.P. Membership

    Alpine Fly Fishers Club
    President & Newsletter Editor--The Dead Drift

    North Idaho Fly Casters club

  8. #8
    Normand Guest

    Default

    i would suggest a Dr Slick tool kit and an inexpensive stationary vise.

    figure out what flies you want to start out with and buy only those materials

    forget about prepackaged kits. theres tying materials in there you may never use.

    tools

    http://www.drslick.com/products_giftsets2.asp

    vise

    http://www.cabelas.com/cabelas/en/te...534&hasJS=true
    Last edited by Normand; 08-09-2008 at 07:35 PM.

  9. #9
    Join Date
    Dec 2006
    Location
    West Tennessee
    Posts
    2,251

    Default

    I got one from Bass Pro a couple of years ago and it was pretty good. I still use the vise that came in it.
    Good fishing technique trumps all.....wish I had it.

  10. #10
    Join Date
    Mar 2000
    Location
    aimless wandering
    Posts
    2,042
    Blog Entries
    12

    Default

    I recommend buying individual components instead of a kit. You will get what you want or need to tie particular flies, you can control the quality of EVERY part, and you won't have a lot of stuff left over that you will never use.

    Do not be daunted by prices of some things. You don't need a ton of materials to get started. A decent vise (no need to spend $400), some tools, a selection of hooks, and a collection of furs, feathers, threads, and so forth.

+ Reply to Thread

Similar Threads

  1. Request for Fly Tying Materials for Youth Kits
    By canecast in forum Things Wanted
    Replies: 1
    Last Post: 12-23-2010, 07:38 AM
  2. Beginning to tie
    By dmark in forum Fly Tying
    Replies: 13
    Last Post: 01-18-2010, 06:03 AM
  3. Beginner Fly Tying Kits
    By MarkF in forum Fly Tying
    Replies: 9
    Last Post: 10-25-2006, 12:49 AM
  4. Beginning Fly Tying kit....
    By macfly55 in forum Fly Tying
    Replies: 41
    Last Post: 09-25-2006, 09:47 PM
  5. Beginning Tying - What tools/kits?
    By paflyfisher in forum Fly Tying
    Replies: 10
    Last Post: 05-14-2005, 04:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts