After a few weeks of saying that I'd have this rod done, I'm finally at that point, but I'm not quite ready to finish it up just yet.

I ordered some Flex Coat for the finish. The first coat went on smoothly and came out with very few bubbles which didn't really show up after it had cured. The second coat has a haze on the surface. I am considering putting a third coat on since the wraps look like they only have one.

The second coat was mixed slowly for a couple of minutes and was clear when I put it on. The first coat I mixed a bit faster and came out with air bubbles...

Will the haze have any ill effect on the third coat? I am considering trying to redo this, but may leave it like it is.