Questions about the rod kit
OK. Today my rod kit arrived. I got St.Croix rod kit from Cabelas.
Looking at it I can already see the problem. Got 5 little pockets of epoxy called Double/Bubble Extra fast setting epoxy. Instructions do not say anything but from this it would look like this is both glue and finish?
Is that correct?
If this indeed is the case than I do not think that's enough.
Life is what happens to you while you're busy making other plans. - John Lennon
I would think that the epoxy was to glue on the reel seat and grip. Never heard of that stuff though.
Originally Posted by MikieFinn
I can't answer your question directly, but I'd encourage you to call them and find out. The wrap finish can be a bit tricky if not done quite right.
When I built a rod I thought everything was pretty straightforward until I messed up mixing the finish epoxy. One section ended up tacky and wouldn't dry. I had to put a light coat over the top, which fixed it, but unfortunately it was the tip section and the finish was a bit thick then. Doesn't seem to affect the rod. But since then I like to use the pre-loaded syringes from Flex-Coat. You can get a very accurate measurement of the two parts. And the root of my problem was I mixed the two parts when they were too cold, so be aware of that, too.
Anyway, have a great time building it and good luck!
I'm confused--first I do not see where Cabelas sells a St Croix kit. I see only Cabelas and G-Loomis. I have used many of their kit supplies and they usually send 2 packets of Epoxy -- 1 for the real seat and the other for the grip. Also 2 packets of Rod Finish,one for each coat of the guides. I just finished a class with 10 rods using these supplies.
I found the extra packets that I have and it does say Extra Fast Setting working time 3--5 minutes. As I said above one would be for the reel seat and 1 for the grip. Do not try to use the first also for the grip. Call Cabelas 1-800-237-4444 and tell them you need at least 2 packets of their Professional Rod Finish. BILL
[quote=William Fitzgerald;213549]I'm confused--first I do not see where Cabelas sells a St Croix kit. I see only Cabelas and G-Loomis.
I checked and Cabellas sells a St Croix Spinning kit the picture only shows 2 packets of epoxy. Is your kit a spinning rod?
For God's sake, Don't Quote me! I'm Probably making this crap up!
http://www.cabelas.com/cabelas/en/te...364&hasJS=true
http://www.cabelas.com/cabelas/en/te...364&hasJS=true
Both are fly rod kits for St. Croix, but I beleive you are missing the flex coat.
The brand doesnt matter--you asked about the epoxy so I think this is your first time building. Hope they sent a rod building instruction book also. If not ask for that. You have a long way to go before you need the finish packets. Fishbum a rod building member on FAOL ran the class that I mentioned. He showed everyone how to find the spline so that you put the guides on the outside of the spline for a fly rod. You glue the tip top then the reel seat and grip then tape on the guides to line everything up. BILL
Yes it's SC III ultra light spinning rig. This is my first build, I'm trying to see if I can get decent results. I do want to build either "Legend" or "Legend Elite" fly rod but only if I can actually do this right before I sink that kind of money into it. On the other hand if I was going to get another rod it would have to be an "upgrade" from what I have. I love the Avid I got so I decided to go with that. The price is right and if it don't come out perfect than I can either live with it or ask the local builder to redo it for me...
I'm not surprised that Cabels missed something though... I'm not gonna bother calling them though. I'm just about to order a Diamondtite finishing kit from Mudhole. I will use the stuff in the kit as a glue only. Five pockets shoud be enough for the handle and reel seat... even with my lack of abilities.
BTW. Just wondering. Is rod building epoxy adhesive different from other epoxies? I have a "5 minute" epoxy for my fly tying. Can this stuff be used as glue on a rod?
Life is what happens to you while you're busy making other plans. - John Lennon
There are a few uses for 5 min epoxy - one I can think of is gluing the tip-top on - you want a fast setting glue for that so that you don't have to hold it in position forever. The grip and reel seat don't have to set so fast, as you just leave them in position and set it aside.
The rod epoxy is the same as all other epoxy--just in a double easy to use packet. For a spinning rod the guides go on the inside of the spline bend. BILL
Posting Permissions
Reply With Quote