Rod has been there for about 30+ years. It's a two piece rod with no markings whatsoever on it. It's very stiff and without much flex in it. Was dirty and covered in dust and grime. Butt section is 33" long and tip section is 32 1/2" long. Thread wrappings are a yellow and black color and they make a "mottled" looking pattern. There are two small double wraps of red thread, about a 1/4" wide, and separated by about a 1/2" spacing, that are about 4" above the hook keeper. All wrappings are tight except there is a slight "play" in the male/female ferrules. Tip section has a small right hand "set/bend" to it when looking down towards the tip with the guides on the bottom. Reel seat is of an up-locking type and the butt end has a opening with a small lip on it. May have had some kind of cap on it at some time. Cork handle is well-worn and looks like it has seen many a days use. Sorry, no photos to post. Know nothing about boo rods so am open to suggestions about repairs etc. Planning on bringing it to next T.U. meeeting and seeing if anyone there can enlighten me; but, thought I'd post a description here in the meantime. Thanks for any tips.