+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: They're Here! They're Here!

  1. #1
    Join Date
    Apr 2006
    Location
    Gaithersburg, MD/Gettysburg, PA
    Posts
    227

    Default They're Here! They're Here!

    I got a nice little surprise this morning when I got to work. My share of the "bulk rods" purchased by a number of us finally arrived today. Let me tell you, I can hardly contain my excitement. Here is a picture of the scene lurking behind my desk at work.



    So yeah, between peaking behind me to see if they are still there, and looking at each one over and over again; I'm not going to get any work done today! Some of you can look forward to a bunch of questions over on the rod building forum. I can't wait to try my hand at refurbishing, and learn a bunch of new stuff!

    I also wanted to take a second and thank Joe Martin for all the time and hard work he put in to get this together. Joe has managed this rollercoaster ride beautifully - He really stuck with it to make this happen. Honestly Joe, I can't thank you enough. I hope that someday we can reunite some of these beauties on the water.

    On another note. I know that some had been interested in possibly trading some rods. I would be willing to trade pretty much anything I received for a smaller rod (less than 8ft). I fish mostly small streams so something shorter would be nice. If you interested, check the list that Joe sent out and feel free to shoot me an email or PM. If not, no big deal because I certainly love what I have already! I can?t wait to hear how everyone else?s share turns out.

    Andrew

  2. #2
    Join Date
    Feb 2006
    Location
    Manchester,Michigan,USA
    Posts
    1,375

    Default

    Where is the list Joe sent out?

  3. #3

    Default

    Aww, shucks You can thank me by catching a fish on one (or 5 or 10) of those rods I'm at work right now, but when I get home tonight, I'll post the list of all the rods on here. Then if there's one in particular you're interested in, you can post a response and the person that ended up with that rod can respond.

    Regards,
    Joe Martin
    Salem, OR

  4. #4
    Join Date
    Dec 2000
    Location
    Bonneau, SC USA
    Posts
    1,622

    Default

    Hey Andrew,

    I'm loving the Granger banty I recently acquired.
    At 6 foot, it's perfect for my swamp fishery. Both
    beautiful and a joy to cast.*G* Might be an option
    for you. Or perhaps as was suggested to me, you
    might consider making up a spare handle with grip,
    seat and female ferrule to accept a mid and tip of
    another rod. Might be fun to play with. Nice
    picture! You've got a busy/productive winter season
    ahead of you.*G* Enjoy! Warm regards, Jim

  5. #5

    Default

    Still at work, but managed to find the list I posted in my original "Holy Cow" post:

    Montague
    Sunbeam (?) 9?, 3/1, Missing 2 guides
    Mt. Tom 8?6?, 3/2, Has original sales sticker
    Mt. Tom 8?6?, 3/2
    Mt. Tom 8?6?, 3/1
    Sunbeam 9?, 3/2, 1 tip is 1? short
    Mt. Tom 9??, 3/1, missing several guides
    Sunbeam 9?, 3/2, looks ?restored?
    Sunbeam 8?6?, 3/1, missing 2 guides
    Clipper 9?, 3/1
    Deerfield 9?, 3/2
    Lakeside 9?6?, 3/2, missing 1 tip-top+1 guide
    Rapidian 8?6?, 3/2
    Rapidian 8?6?, 3/1, missing tip top
    Rapidian 9?, 3/1
    ?Unknown? 8?6?, 3/1
    ?Unknown? 8?6?, 3/1

    South Bend
    TF 359 9?, 3/1, Reel seat cracked
    346 8?6?, 3/1
    359 9?, 3/1, ferrules cracked
    ?Unknown? 9?, 3/2, needs some wraps repaired
    47 9?6?, 3/1, missing 2(?) guides, needs ferrule re-set
    59 9?, 3/2, needs one guide replaced
    359 8?, 3/1, tip is 6? short
    57C 9?, 3/2, missing 1 guide

    H.I.
    Lucky Strike 9?, 3/2, missing 1 tip-top+1 guide
    Roosevelt 9?, 3/1, missing 1 guide
    ?Unknown? 9?, 3/2, Missing a couple guides (3?), 1 tip is 6? short, reel seat not original
    ?Unknown? 9?, 3/2, needs ferrule re-set
    Lucky Ace 8?6?, 3/1
    Ike Walton 9?, 3/2
    Lucky Ace 8?6?, 3/1, needs 1 guide
    Governor 9?, 3/1, Missing stripping guide
    Younger (?) 9?, 3/2, missing 1 tip top
    Governor 9?, 3/2, needs guides re-wrapped
    Beaverkill 9?, 3/1
    Spinner 9?, 3/1
    Cascade 8?10?, 3/1
    Commadore 9?, 3/1, missing 3 guides
    ?Unknown? 6?6?, 2/1, needs refinish

    Re-finished/?banty? rods
    9? 3/1, tip is 6? longer than other 2 sections, looks like a 4-5wt
    5?10?, 2/1, probably a 3-4wt
    6?, 2/1, probably a 3-4wt
    6?, 2/1, probably a 4-5wt

    Regards,
    Joe Martin

  6. #6
    Join Date
    Jan 2004
    Location
    Gardnerville, NV
    Posts
    486

    Default

    You know I'm glad I wasn't able to do that buy with you all. If a package came to my with that many bamboo rods, I'd pop a vessel and blood would be all over this screen! Graphic but true.
    "I envy not him that eats better meat than I do, nor him that is richer, or that wears better clothes than I do; I envy nobody but him, and him only that catches more fish than I do." Izaak Walton
    God Bless and Tight Lines ----*<(((>< ~ ~ ~

  7. #7
    Join Date
    Nov 2005
    Location
    keizer oregon USA
    Posts
    380

    Default theyre here

    Andrew, figgerd youd be happy. I helped Joe ship them out, enjoy

  8. #8
    Join Date
    Jan 2006
    Location
    Portland, OR, USA
    Posts
    322

    Default

    I kinda wish I woulda gotten into that action...oh well...
    "Some people fish their entire lives without realizing it's not the fish they're after."

  9. #9
    Join Date
    Feb 2006
    Location
    Manchester,Michigan,USA
    Posts
    1,375

    Default

    Do any of the rods have socks and tubes? Email me please, I would like to discuss a possible trade long rod for shor tod. Thank you, Jonezee

  10. #10

    Default

    I believe one of the South Bend's had its sock, but that was it.

    Regards,
    Joe Martin
    Salem, OR

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts