On my prototype I used a 3/8 very high grade rare earth magnet, but you had to be the hulk to open the box. Now I am using a lower grade 1/4 diameter magnet, and they have a very nice pull to them.
Type: Posts; User: Professor
On my prototype I used a 3/8 very high grade rare earth magnet, but you had to be the hulk to open the box. Now I am using a lower grade 1/4 diameter magnet, and they have a very nice pull to them.
It has been a while since I posted anything so I thought I would share my latest project. Since retiring in June, I just do not have time to do everything on my list. During the winter, I was...
Bugman,
You may want to send some to the Quiet Waters program. I just shipped out about 100 turkey feathers for their tying program. I am sure they could send these guys home with a few extra...
I have over 100 turkey tail feathers that I would like to donate. I would prefer giving them in lots of 10 feathers or less so everyone has an opportunity to get some. If you have a...
Yes, this was something I always wanted to try so this past spring I built a steamer and gave it a go. To my surprise the first one turned out fantastic so I built six more, gave one to a coworker...
Here are a few shots of my area out in my garage. Nothing fancy but it gets the job done and I don't have to worry about keeping it too clean.
899990009001
Thought I would share this picture with everyone. I came across what look to be an old spring-house while native fishing a small mountain stream in north central PA. It was built into the side of a...
Casey & Larry
Sounds like you might need another one to help organize all of your extra spools. Maybe I can design one with 168 rods instead of 84.
I just started making eight more, but the...
Once the weather breaks I am head for the stream and the workshop closes for a while. Looks like at least another month before that will happen so I will keep puttering around at night.
I like...
Yes, there is a 4 inch carousel between the base and the tower giving you 360 rotation.
I thought I would do a test run to see if there is any interest before I make more. I have 3 solid oak, satin finished, hand crafted thread carousel that I would like to offer for sale. They hold...
Gordo7,
The inside dimension of the square is only 3 x 3, not a big storage area. The overall size is 10.5 high x 4.5 square.
Bugman,
As soon as I start producing them I will let you be my...
I printed a full scale pattern of my hole layout and taped it to the side, centered punched them and then setup my drill press table to 10 degrees. My drill press table tilts, so setting the angle is...
The revolving base is a 4 x 4 lazy susan carousel that I buy at the local hardware store. It cost around $5.00.
Here are a few pics of a new spool carousle that I dessigned and built. They hold 82 spools, plus there is room for a few attachements on the top.
I have made 5 so far, gave two to a couple of...
Doc,
Sent you a PM
Thanks for the offer.
Professor
Here is a good site for steelhead patterns.
[url=http://steelheading101.com:b11a9]http://steelheading101.com[/url:b11a9]