Worth a shot. I'll hit the vise when we return from a trip back to VA in 10 days
:D
Regards,
Scott
Printable View
Part 1
Had an epifanny in Home Depot
http://i1302.photobucket.com/albums/...ps7a8f0252.jpg
now I'm tying tube fly hoppers
http://i1302.photobucket.com/albums/...pse751bbd0.jpg
http://i1302.photobucket.com/albums/...pscb33504c.jpg
just hold the foam strip against the tube, apply a lot of Super Glue to the foam (no need to wax the needle)
http://i1302.photobucket.com/albums/...ps601da02e.jpg
wrap foam around tube; since it's not gonna stick to the needle I could really pull the foam tight to get good adhesion (to the tubing, too), and adjust tension to create body taper
http://i1302.photobucket.com/albums/...psbf47e9cb.jpg
http://i1302.photobucket.com/albums/...ps1afa9582.jpg
slid off the needle slick as whale snot; now I got Carnage on a stick
http://i1302.photobucket.com/albums/...ps2314a970.jpg
trim the butt and front tube (not the front foam, yet) and poke a hole in the bottom to slide the hook into
http://i1302.photobucket.com/albums/...ps06604dac.jpg
insert hook in vise, start the thread and build up a tying base; forgot to add foam binder strip for more bulk (next time)
http://i1302.photobucket.com/albums/...psd42a337e.jpg
coat with Super Glue
http://i1302.photobucket.com/albums/...ps19393982.jpg
Part 2
slide the body forward, wrap once around with the foam and tie it down
http://i1302.photobucket.com/albums/...ps1e14f3d6.jpg
clean, stack, measure a clump of elk hair and tie it in
http://i1302.photobucket.com/albums/...ps5a55f984.jpg
http://i1302.photobucket.com/albums/...ps61a1dba2.jpg
take a wider strip of foam and tie in underneath at wing tie-in position
http://i1302.photobucket.com/albums/...ps2b5ee572.jpg
poke a hole in foam where hook eye meets, pull foam up, move thread to hook eye and secure foam with a couple firm wraps
http://i1302.photobucket.com/albums/...ps2cd2ea24.jpg
move thread back to wing tie-in position and secure foam on top
http://i1302.photobucket.com/albums/...ps23464f25.jpg
add legs and indicator
http://i1302.photobucket.com/albums/...ps2c0d04a7.jpg
http://i1302.photobucket.com/albums/...ps53a9a1ce.jpg
trim head foam top and bottom, whip finish, SHHAN and you're done
http://i1302.photobucket.com/albums/...ps2594e9b3.jpg
http://i1302.photobucket.com/albums/...ps21f0c8c9.jpg
Sorry for the ugly orange hopper but I was playing around with some ideas for an October Caddis when inspiration hit. They make heat shrink tubing in 1/16" which would be a little smaller, but I think for hoppers #12-14, I'll use something like Larva Lace or Hareline tubing.
Regards,
Scott
I like these, but even tho my eyesight is fading, I don't think I'd need an indicator on top of that fly just yet . . . 8^)
Am I the only one that has trouble getting solid hook-ups with an extended body? And I would think that the tube underbody would make it worse.