-
practice rod blanks
After reading every thing i could over the last 3 years,i want to finally like to try my hand at building a rod.I am currently looking for a source of cheep rod blanks to practice on.Besides carbon arrows,does anyone know where i could aquire any?Thanks in advance.Ray
-
Forecast blanks are pretty cheap and make a very decent rod; if you're looking for something a little cheaper, try here:
http://www.utmostenterprises.com/UTMOSTBLANKS.htm
Regards,
Scott
-
Don't go for the absolutely most cheap-est blank you can find. Find a lesser cost blank that has features you know you like in a fly rod. If you find one you like you'll be more apt to finish the rod, and more apt to use it. Take your time, pay attention to what you're doing, enjoy ... and if that's not possible at that moment, put it down and walk away for a little bit. If you aren't happy with the color of the thread, or the way the wraps are going ... start over with thread you do like, and more controlled wrapping. Anything you put on the blank can be removed for a clean start. Ask questions. Listen to the answers. Have fun.
-
You can practice on pieces of a broken rod if you have one. If not look in the discontinued bin at your local big box for a cheap rod of any kind. You can practice your wraps and check colors on it between the guides or even remove them and get practice by putting them back on. If you don't want the rod when you're done just drop it at goodwill with the extra wraps removed.
-
Take a look at what some of our sponsors we have. Utmost batson blanks are a good choice and they may have some on sale. I have not used Global Dorber, but I do know that their blanks are lower priced. Seiver would be another good choice for lesser priced blanks. If you have a Cabelas nearby you could check them out.
-
I am sorry,i meant broken blanks to practice on,epoxy,inlays,wraps,etc.Sometimes,what i think does not come out the same as what i write.I have checked e-bay.Ray
-
Just get a 5/16 or 3/8 metal rod at the depot or lowes. Practice to your hearts content. If you fill the 12" rod just take a knife and cut yourself more space.
-
Why waste your time on building a bad rod - one you most likely will never use and/ or will be embarrased to show. Almost every rod that I have built has been "practice" in one form or another. Your first one may not be cosmetically the greatest, but if the rod and components are decent, it will still work just fine. I learn or try something different each time I build a rod so therefore it is still "practice". Betty's comments are correct. Why not just purchase a kit from Hook and Hackle -- one that is decent but one that is not too expensive and just start putting it together. Take a little time and care gluing up the real seat and handle because you won't be able to change that once it is epoxyed on. Other than that, you can play around all you want with trying in the guides -- and change colors, patterns, etc. all you want -- it won't be permanent until you coat them with epoxy or whatever you want to use.
Don't be scared about it -- you'll be surprised at how simple it really is.