watered down

At the recent Great Waters show a fellow was telling me he watered down his flex coat 50-50 on the first coating, then went full rate a second time over. It has slipped my memory what he used to cut the stuff. Any clues? I was thinking acetone but not nervy enough to try it without picking your brains. JGW

i believe it is acetone. a 50-50-50 mixture of that and the two part flexcoat

Woooo....be careful out there. Thinning FlexCoat requires careful measurement to get it right. If you wish to thin it you have 2 choices, acetone or epoxy thinner. The gurus of reference recommend that to a measure of 3cc each of the 2 parts of Flexcoat, add 1 to 4 DROPS of solvent. A glass eye dropper is the tool to use for this. Mixing very thoroughly should give you the thin coat required.

------------------

Acetone's the one,but never more than three drops
G