-
Bullet Heads
Most of the instructions I've seen for bullet-head flies start with the body and work towards the front. I've always had problems attaching the hair for the head and getting it to spin properly with the stub ends of the body and wing getting in the way, so I decided to reverse the process and tie the hair for head in first, letting it protrude out over the front of the fly while I tie in the rest:
a little thread to get things started (UTC 140 works great)
http://i80.photobucket.com/albums/j1...n/IMG_9594.jpg
a good hunk of hair (I like elk for the head but deer's fine, too) about shank length; you really want to use more hair than you think you need, which is somewhat counter-intuitive
http://i80.photobucket.com/albums/j1...n/IMG_9596.jpg
trim the butts, a couple soft loops and then pull firmly, letting the hair spin around the shank
http://i80.photobucket.com/albums/j1...n/IMG_9597.jpg
like so
http://i80.photobucket.com/albums/j1...n/IMG_9601.jpg
trim the butts (optional, but makes for a neater fly)
http://i80.photobucket.com/albums/j1...n/IMG_9603.jpg
The hair doesn't get in my way and I find it provides a nice base to attach the body and wing.
http://i80.photobucket.com/albums/j1...n/IMG_9606.jpg
a drop of Crazy Glue helps secure everything here
http://i80.photobucket.com/albums/j1...n/IMG_9609.jpg
add underwing (landscape fabric)
http://i80.photobucket.com/albums/j1...n/IMG_9613.jpg
add overwing
http://i80.photobucket.com/albums/j1...n/IMG_9618.jpg
push the head hair back over the fly; a finger works fine (guess those bullet-head tools would, too). Cinch it all down with a few firm wraps, add legs, a little Sally Hansen, trim out the bottom and Bob's your uncle
http://i80.photobucket.com/albums/j1...n/IMG_9621.jpg
They're a little putzy at first (mostly proportions, amounts and thread tension), but not hard and I got the hang of it after a few flies. Cool thing about the extended foam bodies is they're simple, you can make a bunch up ahead of time, bag them up and use as needed.
Regards,
Scott
-
Very nicely done, with the commentary and pixels, Scott.
John
-
Very pretty Scott.
FWIW, I don't spin the hair when I do bullet heads. I just shove a stack on from the front with the hook eye in the middle of the stack. You have to work the thread a little bit through the hair, but it's not a big deal.
-
Steven,
I've done it that way, too. Either works, but I get more even hair distribution spinning it; just my observation.
Regards,
Scott
-
Great SBS and great shots!
-
What's your favorite source of landscape fabric?
-
They stopped carrying it at our Home Depot but I found it at a local nursery. Stuff cuts like a champ and doesn't seem to fray.
http://i80.photobucket.com/albums/j1...n/IMG_9610.jpg
Regards,
Scott
-
Scott -
By just adding a pic or two and brief description on how to make the extended foam body, this would make a neat FOTW article. Neil would appreciate it, for sure.
John
-
John,
I was at the 10 pic limit on this thread or would have included a shot; I'll see what I can do.
Regards,
Scott
-
Here's the back half (I'll try to submit the whole fly as a FOTW at some point):
Charlie Craven has a great tutorial http://www.charliesflyboxinc.com/fly...fm?parentID=76 for the Rogue Stone which is what this is supposed to be with some modifications. You can do it by hand, like Barrett Christiansen does in this nice video for the Morrish October Caddis http://oregonflyfishingblog.com/2008...ctober-caddis/
or place a needle in a vise (gives me a chance to break out the old Regal).
http://i80.photobucket.com/albums/j1...n/IMG_9629.jpg
push the foam strip onto the needle and then attach the tying thread (like I said previously, UTC 140 works great)
http://i80.photobucket.com/albums/j1...n/IMG_9635.jpg
squeeze the foam, and adjust to where you want the first body segment
http://i80.photobucket.com/albums/j1...n/IMG_9636.jpg
couple fairly firm thread loops around the foam (but not too firm or the thread will cut)
http://i80.photobucket.com/albums/j1...n/IMG_9638.jpg
then "split the uprights", move the thread between the foam "fingers" and up the needle to where you want the next segment
http://i80.photobucket.com/albums/j1...n/IMG_9641.jpg
repeat
http://i80.photobucket.com/albums/j1...n/IMG_9642.jpg
and again
http://i80.photobucket.com/albums/j1...n/IMG_9643.jpg
tie off with a couple half-hitches, slide the body off the needle
http://i80.photobucket.com/albums/j1...n/IMG_9647.jpg
trim the back end and front, brush a little Sally Hansen on the thread wraps and you're ready to go (excuse the mortar on my fingers, I'm doing this while laying tile in my bathroom)
http://i80.photobucket.com/albums/j1...n/IMG_9651.jpg
You can go production mode and make a bunch of these bodies ahead of time (no need to carry 2 vises or go back-and-forth between needle and hook in 1 vise).
Regards,
Scott