Cleaning/treating with ZipCast
In the picture below, I use an Angler's Image Line Winder & ZipCast on my lines. I have shortened the line length in the picture to best illustrate my method. If you look closely, you can see that after I have spooled my line on the winder, I "loop" the line OUTSIDE one of the winder's "arms" to essentially lock the line in place & apply the ZipCast with 2x2 cotton gun cleaning patches to a taught line. After treating that section of line (usually 2-3 feet), I reel to within a couple inches, "unloop" the line, pull 2-3 more feet out, "loop" it on the arm to lock it again, & treat that section, repeating until the entire line is treated. No repititious washing, drying, treating, etc, etc.....it is all "one step easy"! It's pretty darn fast too.
http://i86.photobucket.com/albums/k9...kesPics860.jpg
Any questions, just ask. BTW, when 1 side of the patch gets too soiled, just flip it over. I sometimes can treat 2 lines with one patch.
Mikey