Printable View
I am intrested in purchasing a high qaulity bamboo rod. Do any of you have any recommendations where a fellow might purchase such a rod ? If money was not an option who or what name brand would you recommend ? If it was then what would you recommend ?
Sage -
If cost was not a consideration -
http://www.oysterbamboo.com/bamboo-fly-rods.html
John
How about a little more info? What weight line you looking at? How much experience do you have casting/fishing other rods? What 'action' rods do you now use and like/dislike? :)
Here is a link to several online dealers and other sources for bamboo rods.
http://clarksclassicflyrodforum.yuku.com/topic/12640
I would also agree that more information about the rod you are looking for would be helpful.
Bob :-P
The very best is Ron Kusse who is a supporter of this site
If money was no object;
http://www.ronkusse.com/blacktroll.html
If money was a concern;
http://www.elkhornflyrodandreel.com/flyrods/bamboo.cfm
If money was an object;
fiberglass
If I was going to purchase a boo, I would talk to John Channer. I have fished with the man, seen his work, and know he would make me a top quality rod, and stand behind it 100%.
Drop by the chat room on Thursday nights, and listen to the boo chat. Several makers in there, usually, including John.
Before you purchase a bamboo rod from anyone you need to give Mike Brooks a call (541) 684 ? 3884- he is highly recommended on the bamboo forums - he will share all the information of bamboo rods you want and will want to know - even if you do not buy from Mike he will treat you the same as if you purchase one - you owe it to yourself to touch base with Mike
Thanks guy's for your reply. I will have to go on tonight and check out the forum. As for experiance. Never fished a Boo before . As far as graphite about 28 years of experaince with a mid and a fast tip rod. Never cast a fullflex before. For what wt rod . Thinking a 4 or 5 wt . I am hoping you folks can steer me in the right direction. I know there are allot of folks here on site that fish and make bamboo rods. I would love to hear from them. Again thanks for your replies. Dave V
Any of the above mentioned makers would be a good chioce for a bamboo fly rod. Rod makers in the United States are making the finest bamboo fly rods ever produced in the world.
I make a great 5 weight bamboo rod. 7'6" or 7'9", 5 weight, hollow built, 2 piece that almost cast itself. Less than $1000.00. Fishes in close or way out if need be. I also do a 7', 4 weight on the same taper.
Good luck on your search. I am sure you will enjoy fishing with bamboo.
fishbum
Hello Sagellbean, if you can wrap a rod then you might look at Mike Brooks. I know from having ferruled blanks made that Mike will do you more than right. And if you tell Mike how you want the rod to cast, that's how it will cast.
The others mentioned and that posted are experts and make fine rods also.
Cheers,
MontanaMoose
Suggested current bamboo rod makers, if money is truly no object:
R.W. Summers......you'll probably have to buy on the secondary market.
John Bradford, ditto
Walt Carpenter, ditto
Homer Jennings.......1 1/2 to 2 year wait. Although his rods are true bargains at what he sells them for.
Chris Carlin........approx. 1 year
Mike Clark.....not taking orders, again a secondary market rod, if you can find someone willing to sell.
Per Brandin, a long wait.
Bruce Howells, no idea on wait time
Sweetgrass Rods, close to a year I think?
Dave Male, probably 6 months to a year.
Marcelo Calviello, not sure of his wait time?
Harry Boyd, ditto.
Rolf Baginski, ditto
R.L. Nunley, ditto
The previously mentioned Ron Kusse, no idea of wait time.
I'm forgetting others, but if you want a truly fine bamboo rod of impeccable build and taper, you can not go wrong with any of the above, in my opinion.
Bob
Dave,
Here are a few of our rods that are available to purchase:
http://www.leftcoasttackle.com/available_bamboo.html
http://www.mwreynolds.com/HTML/anglingBAMBOO.html
If you're looking for something different, give me a call at the shop (541)926-8266. Weather permitting, I should be there tomorrow.
Regards,
Joe Martin
I have an Elder 7ft 4wt Black Log Creek that I got in October. It is a very nice rod and was built by Curt Elder in Overland Park, KS. He is a full time builder from back east, hand splitting cane and building all of his own blanks, and turns out some beautiful rods, that fish as well, if not better than they look. I would recommend taking a look at his site.
http://www.elderrod.com/www1/Est-Home.asp?eid=21
Check out the 'Shop News' page for available/ in stock rods and production schedules. He turns out a run of three or four rods of a particular model, at a time, but also builds to suit if you wish to customize.
Check out the rod makers in this guild of bamboo rod makers too
http://www.goabra.org/
I'm waiting on my first now, and I chose Dave Norling in Minneapolis for my builder. He's building me an 8' 2pc hollowbuilt 5wt, I believe on a Powell taper. Can't wait!
I wish I could make up my mind . There is allot I still have to learn. Some say try Orvis , LL-bean or have one custom made. I wish I could cast one before I bought one. I like a fast action rod. but I think I could get used to other actions if I wanted to. I like the look of the Hex rods. I would most like likey get one around 7 ft or so. A 4wt or 5 wt. Just so much to think about. Dave V
Good luck with your rod and maker of choice 92Esquire
Cane Rods For Beginner's, and a dozen or so other good articles about choosing cane rods is available for you in our "With Bamboo" section here of FAOL. Most of the articles are by well known cane rodmakers. Hint, hint. Start here:
http://www.flyanglersonline.com/feat...boo/part43.php
Hi,
Your wish to cast rods rings home with me. Getting a chance to cast some bamboo first is great, if you can. A lot of shops and individual makers allow a return within so many days, but there are so many rod tapers out there, it's almost like saying "I'd like to try some dessert" from a menu written in Greek!
If you were just a wee bit closer to Maine (South Dakota? a long drive-grin), and anyone who is, please feel welcome, I'd say drop by for "SuperBoo" on February 7th, a free, open to the public, cane rod sharing/casting day. The whole idea is to give everyone a chance to cast all sorts of cane.
But there may be a conclave or gathering for cane not too far away - if none of us on FAOL know, the bamboo faithful on Clarks might.
Or, organize one of your own.
Or, as suggested, talk at length to a maker or shop with a good background, or the willing FAOLers who've posted, or post more about your style and preferences for fishing here. Maybe we'll have ideas. The maker is one piece of the equation, the taper is the other (and the cosmetics, and if you want it impregnated, hollow-built......).
Kat
Sage,
Just noticed that you were in Rapid City.I'm in Miles City,Mt. If you want to come by my shop and cast a bunch of 'boo just give me a call.
Sagellbean
To you and everyone FYI,I know that this company is not a paying supporter of FAOL. I like all of you like to support FAOL. But we need to also support our craftmans that are small and one man bands.
FLI - Eugene C. Powell the Greatgrandson of E C Powell is carry on the Powell Family tradition, Bamboo rod making! The 4th generation, he worked with Walton and Press Powell for 20 years. He now has his own company, E C Powell Industries. According to the boys at the Chico Fly Shop, who worked with Press Powell, Eugene craftmanship with Bamboo is more than equal to the Powell tradition of fine Bamboo Rods!
www.ecpowellrodco.com
Fishin' Jimmy
Sagellbean,
We'll be back in SD in May (good Lord willing and the creeks don't rise ... too high!) I'll have my Elkhorn rod (I built it), my Curt Elder rod (gift), and my Diamond back, with me. Come on out and meet up with us, try the rods, see what you think.
Elkhorn is a sponsor, and they have blanks and finished rods.
my you must have been a good girl to get an elder rod!!!!!!!!!!!!!!!!!!
Sage,
was chatting last night with QC. Turns out he is a boo builder of some reknown. I told him I would contact you and suggest you talk to him.
Yes, yes I was! :pQuote:
Originally Posted by mnklagoon
MikeLC, QC is an old sponsor too, check his page on here. Great film of him on it. :)
Betty,
Have you had a chance to fish your Elder yet? What model did you get?
Ror-Eye,
Yes I have fished with it ... and it's incredible! Curt built me a 7', 4 line weight, called a "Black Log Creek" (it weighs all of 3 oz!!). Pretty kewl to stand there in his shop, and pick out how you want the finished product to look. Cork, reel seat, (down-lock), thread colors ...great fun!
He lives fairly close to us, in Overland Park. If you're ever in the area, holler, and we'll go visit Curt! You can get your order in right then!:rolleyes:
Betty
Betty,
Curt is actually a good friend of mine. Back in August, a few of us went out to fish the Poudre in CO. Below is a pic of Curt hooked up with a Grayling on Joe Wright Res.
http://www.myfishingpictures.com/data/500/PICTU_4C.JPG
I have the Black Log Creek also. Wonderful rod to fish with. Kind of neat down in the shop. He is a very talented craftsman, and I have told him I don't know how many times, that I wish I had what it takes.
http://www.myfishingpictures.com/data/500/Bambino.jpg