Printable View
Well after several Grafite Rods It's time! My internal clock is ticking, time for a Bamboo Rod :shock: I guess this is the question phase.
Can you buy a blank, like you do with Graphite?
Do I realy need to buy all the Planes, jiggs, ect...?
Where is the place to buy Boo? (saw HRH Post nice Boo, was that a blank)
I guess what I need to say is HELP :???:
OF,
Yes, the bamboo build was indeed a blank. Elkhorn has a couple different sizes you can get, and finish off to your liking. You won't even need to second mortgage your house to afford one!! Another lovely thing about the Elkhorn blank is that you don't need a dip tank to finish the blank! It comes pre-finished, ferruled and ready to wrap. Then all you have to finish are the thread wraps! You can get the finishings (guides, reel seat, grip) from them also, and they're very nice. I didn't use them on this rod as it is "special", and I wanted a down-locking, fancy wood reel seat for it.
I highly recommend this blank!
HRH
Ohio, I have never built a rod in my life and have only cast three or four boo rods so take this with a grain of salt and a large bevridge of your choice.
things I have learned about boo from FAOL.
You only need the planes jigs, forms etc if you wish to start with the trunk of a tree and build a rod.
there are many places to buy a blank, I have at least two manufaturers localy that would sell me one in addition to many on the net.
Elkhorn is a sponsor here on FAOL, (see the sponsor Page) there blanks are very reasonably priced and from the looks of the one Betty made are well built.
The bamboo section under features on the main page is wonderful to read even if you never want to fish or manufature a boo rod just for the information.
If you follow the links on the sponsor page to the two or three sponsors who custom build boo make sure you have somthing to wipe up the drool off your computer desk.
Eric
(who is thinking of buying a blank)
Incredibly,,, Ron Kusse used to offer blanks; not sure if he will anymore though.
Ohiofly
Ive just started a scratch build last week (third attempt for various reasons)---i got the butt section rough planed and hope to get the tip rough planed and tempered before going to michigan on the third.
If you like, we can have a beer and discuss this at great lengths.:)
I have 3 different rods that a friend made (5/6 wts) to peruse.
Mike---Lorain/Cleveland
Contact Dennis Stone.... Great builder with affordable blanks!
http://www.stonerodco.com/index.html
Jeff
Rod Builders in Stronsville can help you for a local sorce.
Been there, not a bad place.Quote:
Originally Posted by Lake Erie High Ball
PM me lets discuss this maybe o-tuber, and a couple others might like to also.Quote:
Originally Posted by shorthaul
Almost all of the full time builders I've worked with sell blanks. They are also great in working with you to get the perfect taper for your casting style & needs. I would have the builder install the ferrules for you, this will make building your rod similar to building a graphite. They will also recommend guide placement to get the most from your taper.
Quote:
Originally Posted by canefishr101
I second that. I'm just putting the finishing touches on a 3 weight I built off one of his blanks. Very nice. I will be contacting him soon for a blank for my next project - an 8.5' steelhead rod.
(another) Jeff
I didn't know that there were so many places for Blanks. I guess my next step is to narrow down my choice as to what i want in a Blank.
definitely want wt., 3-4 pcs. to travel, 6'-7' length, 2 tips ? well to the drawing board. All your comments are very helpful.
Dave
For a first try take a look at this guys stuff, I don't know if he installs ferrules for an extra charge.
http://cgi.ebay.com/Quality-Made-Bam...QQcmdZViewItem
Ray, don't know if you have firsthand experience with that e-bay guy, but I think he is the one I have heard some bad stuff about. I just searched for bobo and it came up with some interesting posts.
I did some research and the findings were not that good. However he states that he had problems in the beginning, maybe that's what everyone was reacting to? :confused: Think I'll hold off on this one, I'm not starting my build until the dreaded Ohio winter sets in. Plus I need to find just that special reel seat. Then there's that custom cork thing, have to see if Joe has a lathe and some time?:rolleyes: I have it narrowed down to a "Kusse", if available. If not than an "Elkhorn" would be my next go to.
Kusse does sell blanks, I'd give him a call!
Send me a private im and I will let you know what rod blanks to look for.
Also how to contact them.
There are many,many great blanks out there and a few junk ones to.
heres one place for blanks
http://www.farnorthrodsmiths.com/
his name is chris carlin