Probably not for everyone.
Well, here is my latest experiment. I had a real seat turned for me on A7 hardware using lavaflow acrylic. I'm planning on wrapping with red metallic thread and either white NCP or black metallic thread for trim. The blank is matte charcoal in color. Bold, yes. Subtle, not even close. But I think I'm going to like it. Any thoughts/opinions? In my defense, it isn't going on bamboo. :oops:
The seat is probably a bit more stunning than the picture shows.
http://i110.photobucket.com/albums/n...e/IMG_2288.jpg
Re: Probably not for everyone.
Re: Probably not for everyone.
Looking good, the Sulky thread you have takes finish very well and is strong stuff. I've done a few rods in the metallic deep blue with white NCP trim with Batson black framed/blue ring guides which match very well.
Re: Probably not for everyone.
Re: Probably not for everyone.
I turned two acrylic seats for my grandkids and will be doing one for a special women's fly fishing event. I think that one will be "watermelon."
http://img.photobucket.com/albums/v6...rick_Rod_2.jpg
http://img.photobucket.com/albums/v6...Madeline-2.jpg
Joe
Re: Probably not for everyone.
The sulky metallic is my favorite. I wasn't sure if I wanted to go with the red seat, or the olive or cappuccino instead. But I decided to go a little more showy this time. I think it will look pretty cool when it is done.
I like that dark blue of yours, Joe.
Spoonplugger, I think a dark blue seat with blue metallic thread and black frame/blue ring guides would have been my first choice (we must have similar taste), but I couldn't get the dark blue seat.
Re: Probably not for everyone.
AWESOME!!!
Do they have green?
chris
Re: Probably not for everyone.
Quote:
Originally Posted by chris from canada
AWESOME!!!
Do they have green?
chris
Yep. If any of you are interested, here's where I get them:
http://www.cichlidrecipe.com/winslow...at-inserts.asp
Green, red, olive, white, blue (with lots of white in it :( ), brown, grean and teal maple stabilized, and a lot of wood types. I have the lace sheoak on my 2 weight that is just beautiful, too. Dave is a nice guy from the e-mails that we've exchanged, and usually sends pictures before he ships. BTW, I'm not affiliated, but he's given good products and service to me so far, so I will definitely recommend him.
Re: Probably not for everyone.
Re: Probably not for everyone.
ol' blue, Joe- Don't take this wrong. Those are very nice looking inserts. But it kind of reminds me of the old plastic bowling balls I use to have in the '70's. :o I wonder if a guy could find one and cut it up. That's a lot of inserts.
Me, I'm more a traditionalist. Wood, cork or horn.
I hope you post some pictures of the finished rod. I'm anxious to have my mind changed.
BTW what's the weight on one of those?
Re: Probably not for everyone.
Wow, I think these acrylic seats are unbelievalble! I absolutely love them!
Re: Probably not for everyone.
Quote:
Originally Posted by RS1
ol' blue, Joe- Don't take this wrong. Those are very nice looking inserts. But it kind of reminds me of the old plastic bowling balls I use to have in the '70's. :o I wonder if a guy could find one and cut it up. That's a lot of inserts.
Me, I'm more a traditionalist. Wood, cork or horn.
I hope you post some pictures of the finished rod. I'm anxious to have my mind changed.
BTW what's the weight on one of those?
RS1,
The acrylic inserts don't have much weight at all, as they have a 3/8" to 7/16" hole in them, and are barely 5/8" O.D.. It's negligible.
Not sure what a bowling ball would be like as an insert. They usually have a different core material than the outside skin, but if you want to cut yours up, by all means have fun, and let us know how it turns out. For $5 or $6 I'll just keep buying the blanks from my local WoodCraft store.
I don't use acrylic inserts for all rods. The spinning rods were for my grandkids, and they picked the color theme for their rods. The acrylic inserts just brought it all together. You can also see that I turned different grips for each of the rods so they were each unique, just like the kids are each unique.
I will be making a 5wt fly rod for an auction for a Women in the Outdoors Fly Fishing School that our FFF Club is putting on in May 2008, and that will have a "girly" theme to the rod. I already have a watermelon multi-colored blank for that insert, and the thread work will be vibrant colors that compliment it.
I like to mainly use various woods, burls and cork for inserts, but it's fun to do something different. The oddball stuff breaks up the monotony that can sometimes set in when building a lot of rods. Traditions are great, but new traditions can also be made. We don't want people to think that fly fishing is only for "traditionalists" and "purists."
Joe
Re: Probably not for everyone.
I liked it so much that I am bidding on the current blue ones. I am building a 4 wt for a friend of mine for x-mas. The blank is dark blue so I think it will look very good with it. Price is no object for this rod within reason of course. My friend, when I got my first fly rod after over 20 years of not fly fishing, taught me to cast and got me going on fly tying. He has encouraged me all along my ventures in fly fishing. due to his help and my knowledge gained here I am now giving him tips and teaching him different styles of tying. He has build me a computer that is in essence a server in a computer case. He shares his timeshares with the wife and I and asks for nothing in return. He has always wanted a 4 wt so I am building the 4 wt with a fast action for him. If I get the reel seat then I will use the super grade portiguese cork in a full wells. I must admitt that I am very nervous about building the rod because I want it to be perfect. I am also looking into turning my own reel seats and will keep you posted on that.
Re: Probably not for everyone.
Quote:
Originally Posted by harleybob87
I am also looking into turning my own reel seats and will keep you posted on that.
If you do not already have a lathe, consider the Jet line of lathes. They are durable, expandable (length) and affordable. I have the JML-1014I: 10"x 14" Mini Lathe with Indexing Head, and got it for $199.00
http://img.photobucket.com/albums/v6...147823_230.jpg
http://img.photobucket.com/albums/v6.../Mandrel-2.jpg
Joe
Re: Probably not for everyone.
I'm glad to see someone else using plastic. I started turning a green plastic seat this motning for a 5 wt travel rod. I even found a light green mother of pearl insert for the butt cap. should look cool.
Re: Probably not for everyone.
The blue are gorgeous and if I'd known he had those, I would have built on it. The cappuccino are nice, too, and would look good on a tiger eye or brown blank. I might have to build another rod that I don't really need.
Re: Probably not for everyone.
What delightful stuff! Hurrah for you all thinking outside the square box. No square pants Bob in this bunch *S*