8 Visitor Messages

  1. View Conversation
    HAPPY, HAPPY BIRTHDAY TO YOUUUUUUUUUUUUUU!

    Have a wonderful day! And, oh, so many more!!!!!!
  2. View Conversation
    <P>Hi Kevin. I'm at work and i forgot to check which brand of guides you recommended i buy for the 9', 3/4 wt. I'm finishing. I'm going to build another just like it. What do you think of this guide configuration: <STRONG>12, 5, 4, six 3s and an oversized loop&nbsp;tip top?</STRONG> I hope you're doing well and having some fun.</P>
    <P>Bruce</P>
  3. View Conversation
    Hi Kevin, im mailing you the postage on monday, just to let you know. I really appreciate you doing this for me.
    Best Fishes, Daniel
  4. View Conversation
    Holy schmazollie! That's quite the rod! Will it cast a half pound?? Did you do the braid (blue)for the end and the top and bottom of the reel seat, too? She is just going to be blown away!!!!! WOW!!!!
  5. View Conversation
    I did the trade - it was with "fishnbrew" in Eastern MD. He's done several trades before. I was concerned about being in a 1-down position because of my lack of experience at doing a trade. He suggested "how" to do the trade (send via USPS, delivery notification, insurance, and a right-to-refusal-and-return period), but pointed out that it's basically taking a leap of faith in the other guy... He was completely honest and punctual. As it turned out, yesterday we both received the rods and agreed to the trade - we're both delighted.

    Thanks for your help, Kevin.
  6. View Conversation
    Kevin, thanks for your reply. I think I misled you with the word "swap"...I was talking about a trade with a fellow FAOL'er - one rod that he has for one of mine. We did decide to do the trade "even up" with a right to refusal, etc. We both put our rods in the US Mail on Saturday. We'll see how it works out. I've learned that it's basically a leap of faith situation...I was looking for how it should be done to minimize the risks of either of us gettin' "screwed" - wanted it to be fair, equitable, etc. Hope you're enjoying the Holiday weekend with family and friends.

    Paul
  7. View Conversation
    Hi, Kevin -

    Am considering doing a swap of rods with an FAOL member...never did one before. Any pearls of wisdom you could share with me on how to do it so I don't get "burned"?

    Thanks!

    Paul Mundy
  8. View Conversation
    how did thouse patters work out sug
Showing Visitor Messages 1 to 8 of 8
About kbproctor

Basic Information


Date of Birth
April 19, 1952 (71)
About kbproctor
Biography:
This space seems awfully small for much of a bio. :)
Location:
Littleton, Colorado
Interests:
Scouting, fishing, old cars
Occupation:
Custom Rod Builder
Years fly fishing:
5
Anti-Robot Math:
20

Signature


Kevin


Be careful how you live. You may be the only Bible some person ever reads.

Contact


This Page
https://www.flyanglersonline.com/bb/member.php?17442-kbproctor&s=f0a9045c1913a4bb90b45d50c3170706
Instant Messaging

Send an Instant Message to kbproctor Using...

Statistics


Total Posts
Total Posts
2,256
Posts Per Day
0.42
Visitor Messages
Total Messages
8
Most Recent Message
04-19-2011 12:50 PM
General Information
Last Activity
05-30-2019 05:44 AM
Join Date
06-02-2009
Referrals
0

9 Friends

  1. Betty Hiner Betty Hiner is offline

    Senior Member

    Betty Hiner
  2. Byron Zuehlsdorff Byron Zuehlsdorff is offline

    Senior Member

    Byron Zuehlsdorff
  3. CharlaineC CharlaineC is offline

    Administrator

    • Send a message via AIM to CharlaineC
    • Send a message via Yahoo to CharlaineC
    • Send a message via Skype™ to CharlaineC
    CharlaineC
  4. Goduster Goduster is offline

    Senior Member

    Goduster
  5. hardhat hardhat is offline

    Senior Member

    hardhat
  6. mgliss mgliss is offline

    Senior Member

    • Send a message via MSN to mgliss
    mgliss
  7. PRM PRM is offline

    Senior Member

    PRM
  8. tlerm tlerm is offline

    Senior Member

    tlerm
  9. Uncle Jesse Uncle Jesse is offline

    Senior Member

    Uncle Jesse
Showing Friends 1 to 9 of 9
View kbproctor's Blog

Recent Entries

Rod #1 Is finished!

by kbproctor on 11-12-2009 at 09:35 PM
Here it is.

It is a 9ft, 4pc, 4W Now to get a reel and some line for it and go fish it!



A little detail of the first snake and second ferrule.



I inlaid a jungle cock nail just for kicks and grins. This is also one of the home made winding checks.




The second one will be under construction very soon.
Categories
Rod Building

So I think I'm going to build a rod.... Part 2

by kbproctor on 11-11-2009 at 08:59 PM
This was really a kit that could have had more attention paid to detail. The winding check was WAY too big size wise. But that isn't all. The seller "pre-fit" the grip to the blank. That part would have been OK if the tip end of the grip hadn't been wallowed out.

My solution was to make a winding check from a stainless steel washer.

I took a 1/4" stainless washer and put it in my doming block. I then beat the heck out of it with the doming punch. This stretched the center hole some, but it still needed to be reamed out. Once finished with the reaming, I used a jeweler's file to clean up any rough edges and polished it. It covers the buggered end of the cork nicely.

I got the reel seat and grip epoxied on without further problem. While that was setting up, I turned my attention to the drying stand/motor.

Having seen pictures of the rod chucks for these things in the catalogs and online, and being cheap, I decided to build my own chuck.



I used a 1.5" PVC cap, 2" x 1/8" NPT pipe nipple, and 3 #10-32 x 1.5" socket head cap screws.

I located the center of the cap and drilled and tapped for the 1/8" pipe nipple. I then scribed a line about 3/8" from the open end of the cap and measured the circumference with a cloth tape. Divide by 3 and mark. Drill and tap for the #10-32 screws.

I cut the threads off one end of the nipple and drilled a hole all the way through about 1/4" from the end the same size as the hole in the shaft of the 36 RPM motor from Pacific Bay. Jann's has these for just under $11.00. I also ran a drill bit through the nipple to clean things up for a better fit to the motor shaft.

Thread everything together. I also put protective tips on the screws so they would not mar a blank or reel seat. Slide the nipple over the motor shaft and secure with a cotter pin. Total cost of my drying rig including motor, stand and chuck was about $15.

The rod is wrapped and has the color preservative drying on the wraps as I write this. The next installment should be for a finished rod!

Updated 11-11-2009 at 09:21 PM by kbproctor

Categories
Rod Building

So I think I'm going to build a rod....

by kbproctor on 11-09-2009 at 12:11 AM
I got the urge to build my own rod. So.... I go to the forum, start a couple of arguments over single foot vs. snake guides and how to place guides and finally make a decision about what I want to do.

I ordered a nice little 7'6", 4 pc, 4W Traditions II blank from Cabella's. It comes in and is a pretty iridescent olive green. I pick out some other parts from Jans Netcraft and J Stockard and forget to order the wrapping thread. In the mean time, I find some blanks and components on EBay and go crazy. Now I have an 8', 3pc, 4W blank, two 9' 7pc 3/4w blanks, an 8' 2pc, 3w blank, and a kit with a 9', 4pc, 4w blank, rosewood grip and TiCH hardware. I also have a 8' 3/2 bamboo rod that needs some TLC and the stuff to work it over.

I have justified all of this with the boss (also spelled w-i-f-e) by saying I want to make rods for the grandsons. Of course this means I need 4 more kits, but we won't get into that right now.

I decide to start with the 9', 4pc kit from EBay. I have found the spine and have decided to use a spacing chart for this first rod.

Finding the spine was remarkably easy. Using the method shown a bazillion places on the web and in Al Campbell's tutorial on this site,

http://www.flyanglersonline.com/begi...hite/index.php

The blank will fairly jump to the sweet spot. Mark both ends. Now mark them again about 3" in from the end so the marks are not covered up when you put the blank together.

I have the guides all laid out and am ready to start putting the guides in place and lining them up.

Elastic string. Do NOT try to hold the guide and tie it on with elastic string! I spent a lot of time finding guides that decided to go "ZING" across the floor, propelled by elastic string.

"Tie the string to the stick and then slip the end of the wire thingy under the string." says my wife. "It's a IM6 Graphite rod blank." I growl. Then I tie the string to the stick and slip the end of the wire thingy under the string. It works remarkably well but I can not violate the "Man Code" and tell her. I don't think I could take another second of that smirk of hers, anyway.

OK. All of the guides are located and aligned. Wait. that one moved. So did that one. Now I have fine line pinstripe masking tape on the stick along with elastic string and wire thingies. Things are staying put! Let's start wrapping!

I made a nice little wrapping station.



The end pieces and the thread carriage slide on nylon washers and there are pins in each sliding piece to keep things aligned. All washers are inset to the wood.

The wing nuts on the thread tensioning devices are nylocks to keep them from tightening up as the thread is pulled from the spool. The nylocks were a wee a bit tight and hard to turn to begin with so I ran a tap just through the nylon and back out. Now they hold nicely without being difficult to adjust against the tensioning springs. There are nylon washers for the spools to rotate against for smoothness.

As you can see, there is one outrigger to help with support. The mount for the drying motor is out in the garage with the polyurethane in drying mode. It will be ready to go by the time I get the rod wrapped.

The pool table makes a handy wrapping bench. Lots of room!

Good! The thread I forgot to order is here. Let's get this thing wrapped!

Wow! That thread is slick on the blank and it just wants to slip. There! Got it started. Now it won't go up the foot of the guide. The guy told me the guides were already ground. I can see that they are ground, but not much.

I pull all of the guides off and fire up the Dremel Tool with a diamond burr in it and smooth those suckers out. I actually sort of sharpened them so it was a nice smooth transition from blank to guide. I smooth not just the end of the guide foot, but also the top edges so they are not so angular.

I have all of the guides back on and aligned again. This is what? The 4th or 5th time? They are moving again. I swear the darn things are alive.

I dig into Al Campbell's series on building a graphite rod.

http://www.flyanglersonline.com/begi...hite/index.php

I read something in there about how he held things in place. SUPER GLUE! I align the guides once more and put a drop of CA on one foot, make sure it is still aligned, and move to the next guide. Each guide on each section now has one foot glued down. I let things dry and go back and glue the other foot of each guide down, checking the alignment several times for each guide as I move from guide to guide.

Now can we start wrapping?

I get the thread started again and start towards the guide. The thread gets to the guide and moves right on up and over the sharpened and glued foot just as smooth as can be. It appears that the glue actually aided this by filling in and smoothing the transition even more than the sharpening of the feet did.

So what have I learned so far?

First, don't believe the guy when he tells you the guides are ground. Get your file, Dremel, sandpaper, whatever out and make sure they are as smooth a transition as you can get. It makes wrapping SO much easier!

Second, tie the string to the stick then slide the wire thingy under the string. Tape the other foot down with fineline masking tape.

Third, once you get your guide spacing and alignment set, glue those puppies down! Glue one foot at a time, let the CA dry, then glue the other foot down. Assume the guides are alive and that they will move until the glue is dry. Check your alignment frequently.

That is all for this time around. When I get to the butt section and figure out new and improved ways to mess that up, I will add more!

Updated 11-09-2009 at 09:40 PM by kbproctor

Categories
Rod Building